Dubbing (Copying) - NEC N926U Owner's Operating Manual

DUBBING (COPYING)
When using two video cassette recorders to dub a video tape (copying a video tape), they should be con-
nected as follows.
• Using the N926U as the recording deck
to VIDEO IN
terminal
to AUDIO IN
terminal
.+
to AUDIO OUT
terminal
t+
to VIDEO OUT
terminal
HD ..... _
(Recording deck)
10 I
ON SCREEN PROGRAMMIN
Press the REC button
I
1
0
I
I~
.
<=0
co==-
I
=
~--w-.=,~ Ivl~1
'-"---'
~
(Playback deck)
insert and playback a recorded tape
When using the N926U as the playback deck, reverse the connections of these terminals. (Be sure to read
the owner's operating manual of the other deck.)
NOTE:
• When dubbing video tapes, use a TV to check the quality of the playback audio video signals.
• When the audio and video signals are unacceptable, adjust the Tracking control (playback deck).
• Dubbing will cause the image quality to deteriorate somewhat, and recording using the SP speed is
recommended to obtain the best quality duplicate.
CAUTION:
• When dubbing cables are connected to the VIDEO IN and AUDIO IN jacks on the VCR, the VCR
tuner is automatically disconnected. If you want to use the VCR tuner, disconnect the dubbing cables
from the VIDEO IN and AUDIO IN jacks.
-32-