Huawei LUNA2000-200KTL-H1 User Manual page 74

LUNA2000-200KTL-H1 Smart Power Control System
User Manual
Procedure
Step 1 In the SUN2000 app, select a connection mode.
Figure 7-2 Selecting a connection mode
Step 2 Select the login user and enter the login password. The main menu screen is
displayed.
● When you log in to the system for the first time, set the login password. To
● You will be locked out for 10 minutes after five consecutive failed password
Issue 08 (2024-01-23)
c. Keep the mobile phone within 5 m from the Smart PCS. Otherwise, the
communication between them might be affected.
NO TE
● The screenshots in this section correspond to the SUN2000 app 6.23.00.125 (Android).
● When the WLAN connection is used, scan the QR code of the WLAN module to access
the login screen.
● When the WLAN connection is used, the initial name of the WLAN hotspot is Adapter-
WLAN module SN and the initial password is Changeme. Use the initial password for
the first login and change it immediately after login. To ensure account security, protect
the password by changing it periodically, and keep it secure. Your password might be
stolen or cracked if it is left unchanged for extended periods. If a password is lost,
devices cannot be accessed. In these cases, the Company shall not be liable for any loss
caused to the plant.
NO TICE
ensure account security, protect the password by changing it periodically, and
keep it secure. Your password might be stolen or cracked if it is left unchanged
for extended periods. If a password is lost, devices cannot be accessed. In these
cases, the Company shall not be liable for any loss caused to the plant.
attempts at an interval of less than 2 minutes.
Copyright © Huawei Technologies Co., Ltd.
7 Power-On and Commissioning
67