Huawei LUNA2000-200KTL-H1 User Manual page 30

LUNA2000-200KTL-H1 Smart Power Control System
User Manual
Figure 2-12 Working modes
Table 2-3 Working mode description
Working
Mode
Standby
Operating
Shutdown
Issue 08 (2024-01-23)
Description
The Smart PCS enters standby mode when the external
environment does not meet the operating requirements. In standby
mode:
● The Smart PCS continuously detects its operation status. Once
the operation conditions are met, the Smart PCS enters
operating mode.
● If the Smart PCS detects a shutdown command or a fault after
startup, it enters shutdown mode.
In operating mode:
● The Smart PCS controls charge and discharge based on system
commands.
● The Smart PCS enters shutdown mode after detecting a fault or
receiving a shutdown command.
● In standby or operating mode, if the Smart PCS detects a
shutdown command or a fault, it enters shutdown mode.
● In shutdown mode, the Smart PCS enters standby mode when a
startup command is received and faults are rectified, the DC
power is insufficient, or the DC external switch is turned off.
Copyright © Huawei Technologies Co., Ltd.
2 Product Description
23