Charging/Startup And Shutdown - Potensic ATOM User Manual

3.6 Charging / Startup and Shutdown
When receiving a new drone battery, it is required to charge it to wake it up, otherwise the drone wouldn't start.
Connect the TYPE-C charging port of battery and a USB charger to the AC power supply to finish one-time
charging (USB charger is not included in the package. User can use the charger that conforms to FCC/CE
specification to charge the battery). The red indicator will stay on during charging, and turn off automatically after
charging is done. User can charge the battery with the Parallel Charging HUB if fly expansion kit is purchased.
For more details, please refer to User's Manual of Parallel Charging HUB. The Parallel Charging HUB can also
charge the remote controller.
The shortest charging period is approx. 1h 25min through the type-C charging port. Make sure your charger
supports 5V/3A output in order to achieve this charging speed.
User is suggested to charge the battery through the Parallel Charging HUB, in order to charge 3 batteries
quickly at the same time.
It is suggested to remove the battery from the drone to charge for the sake of safety; otherwise, the drone
won't power on if the battery is being charged in the drone.
If the charging cable is connected while the drone is on, it will power off automatically and the charging will
continue.
The battery may become too hot after use; do not charge it until it cools down; otherwise, charging can be
rejected by the smart battery.
Charge the battery on a trimonthly basis to maintain the activity of the cell.
Please connect the original cable or any cable that supports over 3A current to the type-C port; otherwise, it
may cause charging failure or battery damage.
Startup
Drone: Make sure the battery is inserted in battery bin, short press and then long press the power button until
all indicators are on, and then release the button to start up.
Remote controller: Long press the "Power" button until all indicators are on, and then release the button to
finish startup.
Shutdown
Drone: Short press and then long press the power button of the drone until all indicators are off, and then release
the button to shut down.
Remote controller: Long press the power button until all indicators are off, and then release the button to shut
down.
Mode 1
Mode 2
08