Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 472

Front panel
▶ Insert the front VGA cable from the server inside through the opening.
▶ Fasten the front VGA connector with the two screws (see circles).
Figure 319: Installing the front VGA cable
▶ Insert the front VGA cable in the cable clip (1).
▶ Connect the front VGA cable to the system board connector "FRONT VGA"
(2).
Concluding steps
▶
"Installing the air duct" on page
▶
"Installing the fan cage" on page
▶ If applicable,
"Installing the riser module 1" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
472
79.
77.
59.
65.
71.
Upgrade and Maintenance Manual
74.
71.
RX2540 M7