Expansion cards and backup units
Installing the OCP dummy cover
Figure 146: Installing the OCP dummy cover
▶ Insert the OCP dummy cover at a slight angle (1). Notice the position of the
hook and the reccess in the chassis (A).
▶ Push the OCP dummy cover in place (2).
▶ Fasten the OCP dummy cover with the knurled screw (3).
Concluding steps
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
9.5.4
Replacing the OCP module
Upgrade and Repair Unit
(URU)
266
65.
71.
Upgrade and Maintenance Manual
Hardware: 10 minutes
RX2540 M7