Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 372

Processor (CPU)
Figure 229: Applying the thermal paste
▶ Apply a small point-shaped amount of thermal paste (1.0 gram, see
description above) to the center of the heat sink lower surface as shown.
CAUTION
▶
Do not mix different types of thermal paste.
Installing the CPU and heat sink
▶ Confirm that the CPU model number printed on the top of the CPU fits with
the requirements.
▶ Install the CPU, see
▶ Install the heat sink, see
Concluding steps
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
372
"Installing the CPU" on page
"Installing the heat sink" on page
79.
59.
71.
Upgrade and Maintenance Manual
354.
65.
356.
71.
RX2540 M7