Panasonic AG-6124 Service Manual page 85

Fon S003
7. After completion of the upper cylinder unit,
perform "Tape Interchangeability Adjustment" ,
Screw hole "PG Shifter Adjustment" and "Play Frequency
UPPER Response Adjustment.
CYLINDER
TOP VIEW
D
Fig. M2-1
4. Place the cylinder rotor unit so that the inner
U cut of cylinder rotor unit and the projection
on the upper cylinder are fit each other.
(Figure M2-2)
5. Screw 2 screws (B). (Figure M2-3)
Projection (D)
ROTOR UNIT UPPER CYLINDER
UNIT
Fig.M2-2
6. Install the cylinder stator unit and tighten 2
screws (A).
Screws (A) TOP VIEW
STATOR UNIT
UPPER CYLINDER UNIT
Fig. M2-3