Panasonic AG-6124 Service Manual page 24

MAIN FENANCE
REGULAR MAINTENANCE
The purpose of periodic maintenance is to preserve the
functioning of this machine throughout its useful life. The
user or service dealer should perform these maintenance
regularly to ensure that maximum utility is obtained from
the machine.
The VCR is a complicated place of equipment. It contains
many belts, rollers, heads etc., which become worn, and
deterlorate as time goes by, causing trouble. Dust and dirt
will also impede the proper functioning of the machine. In
light of this, it is very important that overall maintenance
be done according to the maintenance chart to maintain the
functions of the VCR, and to avoid accidental problems.
This maintenance should also be performed after any
repairs are done on the equipment.
MAINTENANCE CHART
The following periodic maintenance is required to prolong
the life of the machine.
Ret No. Parts Name
IN P/E 500 | 1000| 2000 4000 | 5000 | 6000 10000
ie | 52 (1)
e[efs
re
fo)
= Tape Transporter
20 (1) A/C Head
714) Uppar Cylinder
70 (1) Cylinder U
60 (1) Supply Reel Table U
61 (1) Takeup Real Tuble U
e
10)
e
e
° .@ [ea
Capan Rote U releleleloa
(0)
QO
106 (2)
105 (2) | Capstan Housing U
49 (1) Prasure Rooer U ©
63 (1) Supply Brake Arm U ©
oe
Ref. No.
IN-PAL elaicias 500 | 1000| 2000} 3000 | 4000 | 5000 | 6000 0000
Temsopm Band U © ©
113 (2) | Timing Balt o) ©
62 (1) | Earth Plate U (©)
12(1) | FE Head @® @e e@e'@'0/@'|e@/,0
127 (2) | Mode Switch () ©
4
}@A} 108 (2) | Main Cam Gear x
10)
e
|e |
|e |
| [| o| 42 (1)
Loading Motor U
| [eo
je |o
| fe
9(1) Cleaner Arm U z=
BAT6301 | Backup Battery
The VCR used for business applications requires particular
attention for several reasons. The installation conditions
and applications are not always the best. Long use times, or
poor environmental conditions may adversely affect the
lifespan and performance of the machine. Regular
maintenance assures that the purchaser obtains the
maximum value for his expenditure. Accordingly, the
necessity of regular maintenance should be fully explained
at the time of sale, as wel! as during after-sale repairs.
Hour
|
40 (1) Inclined (S) U
Inclined (T) U
om Re)
Approx. 5 years
Remark
Ethyl-alcohol or Cleaning Liquid
(Purchase locally)
ie Cleaning
© Replacement
High Quality Spindle Oi!
Rupiicatien (Purchase locally)
| a | Greasing Molytone Grease (MOR265) Wipe the old grease and apply new grease.
Wipe dirt from the parts using soft cloth impregnated with Ethy!-Aicoh ol.
Note: When cleaning rubber parts, avold using excessive alcohol since it
Supply one or two drops of oil.
may accelerate deterioration of these parts.
After cleaning with alcohol, wipe the alcohol quickly and thoroughly.
Greasing S.C.R. Grease ( VFK0680) Wipe the old grease and apply new grease.