Hitachi HF-W6500 60 Manual page 86

No. Object
30 hfwGenDI.gendiNumber
hfwGenDI.gendiTable.gendiEntry.gendiI
31
ndex
hfwGenDI.gendiTable.gendiEntry.gendiN
32
ame
hfwGenDI.gendiTable.gendiEntry.gendoS
33
tatus
34 hfwGenDO.gendoNumber
hfwGenDO.gendoTable.gendoEntry.gend
35
oIndex
hfwGenDO.gendoTable.gendoEntry.gend
36
oName
hfwGenDO.gendoTable.gendoEntry.gend
37
oStatus
38
hfwMcu.mcuNumber
39
hfwMcu.mcuTable.mcuEntry.mcuIndex
40
hfwMcu.mcuTable.mcuEntry.mcuName
41
hfwMcu.mcuTable.mcuEntry.mcuStatus
No.2: For this equipment, the number is 3..
No.7: For this equipment, the number is 1.
No.12: The number of internal drives that can be mounted in the HF-W is set for the number of monitored drive bays.
For this equipment, the number is 3.
No.17：This object is enabled for SSDs only. For items other than SSDs, the value is set to 0.
No.19: The number of memory slots is set for the number of monitored memory slots.
For this equipment, the number is 4.
No.24：For the A and S models, the value is set to 0.
Nos.25 through 29：Supported by the B and T models only.
No.30：For this equipment, the number is 4.
No.34：For this equipment, the number is 3.
No.38：For this equipment, the number is 1.
4. CHECKING THE HARDWARE STATUS
Object
Description
number
Number of general purpose
6.1
external contact inputs
Index number of
6.2.1.1
gendiEntry
General purpose external
6.2.1.2
contact inputs name
General purpose external
6.2.1.3
contact input condition
Number of general purpose
7.1
external contact outputs
Index number of
7.2.1.1
gendoEntry
General purpose external
7.2.1.2
contact outputs name
General purpose external
7.2.1.3
contact output condition
8.1
Number of RAS MCUs
8.2.1.1
Index number of mcuEntry
8.2.1.2
RAS MCU name
8.2.1.3
RAS MCU condition
4-33
Description of the values
－
－
GENDI: GENDI contact
GENDI0: GENDI0 contact
GENDI1: GENDI1 contact
GENDI2: GENDI2 contact
0: open
1: close
－
－
GENDO0: GENDO0 contact
GENDO1: GENDO1 contact
GENDO2: GENDO2 contact
0: open
1: close
RAS MCU: RAS controller
1: Normal
2: Failure
(3/3)