Hitachi HF-W6500 60 Manual page 5

1. SAFETY WARNINGS IN THIS MANUAL
1.1 Safety Warning Indicated as "NOTICE"
⚫ When failure of a drive is predicted, a drive hardware failure is likely to
occur in the near future. We recommend you to back up the data and replace
the drive. For information about how to replace a drive, refer to "HF-W6500
Model 60 INSTRUCTION MANUAL (manual number WIN-62-0074)".
⚫ When OS hung-up occurs, processes on the OS cannot run as scheduled, and
the facility using this equipment may be affected due to delay in processing.
If OS hung-up occurs, resolve it immediately.
●If a RAS MCU fails, the RAS software will not be able to monitor and
control the hardware correctly. Stop the equipment and then contact your
system administrator or maintenance personnel.
⚫ If this equipment continues to operate while fan failure is detected, internal
parts such as a processor are not cooled down sufficiently, and that may
cause thermal runaway of the system due to malfunction of the equipment or
result in damage to the parts.
⚫ When the Hardware status window shows an error in hardware, resolve the
error immediately.
⚫ When failure of a drive is anticipated, the drive may experience hardware
failure in near future. We recommend you to back up the data and replace the
drive. For information about how to replace a drive, refer to "HF-W6500
Model 60 INSTRUCTION MANUAL (manual number WIN-62-0074)".
SAFETY INSTRUCTIONS (Continued)
S-2
(See page 2-3.)
(See page 2-6.)
(See page 2-15.)
(See page 3-4.)
(See page 4-2.)
(See page 4-10.)