2.9 RAS MCU Failure Monitoring Function
The RAS MCU failure monitoring function monitors the operation of each RAS MCU
mounted in this equipment and reports any detected failures by one of the following methods:
(1) Remote notification
(2) Message box display
(3) Alarm lamp
For details about (1), see "CHAPTER 4 CHECKING THE HARDWARE STATUS".
For details about (2), see Figure 2-5.
Figure 2-5 Example of the message box display when a failure is detected in a RAS MCU
If a RAS MCU fails, the RAS software will not be able to monitor and control the
hardware correctly. Stop the equipment and then contact your system
administrator or maintenance personnel.
2. ITEMS MONITORED BY THE RAS FEATURE
NOTICE
2-15