Power level
Setting the power level
Permanent pan recognition is activated
as standard (see "Adjusting settings").
When the hob is switched on and you
place an item of cookware on a cooking
zone, the cooking zone indicator starts
to flash.
Place the cookware on the cooking
zone you want to use.
The cooking zone indicator will begin to
flash.
Touch the appropriate sensor control
for the power level you want on the
numerical display.
The power level selected will flash for a
few seconds in the cooking zone indic-
ator and then light up constantly.
Setting the power level – extended
setting range
The extended setting range for the
power levels is activated (see "Adjust-
ing settings").
Press the numerical display between
the sensor controls.
The power level selected will flash for a
few seconds and then light up con-
stantly. The intermediate setting will be
represented by an illuminated dot next
to the number.
Changing the power level
Touch the relevant cooking zone in-
dicator.
The cooking zone indicator will begin to
flash.
Touch the appropriate sensor control
for the power level you want on the
numerical display.
Manually connecting/discon-
necting Flex cooking zones
To manually connect or disconnect
the Flex cooking zones, touch the
sensor control.
Operation
45