Miele KM 7678 FR Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Hob
  5. KM 7678 FR
  6. Operating and installation instructions

Miele KM 7678 FR Operating And Installation Instructions

Hide thumbs Also See for KM 7678 FR:
Table of Contents

Advertisement

Quick Links

Operating and installation
instructions
Induction hobs
To avoid the risk of accidents or damage to the appliance it is
essential to read these instructions before it is installed and used for
the first time.
en-AE, SA
M.-Nr. 11 271 100

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KM 7678 FR and is the answer not in the manual?

Questions and answers

Related Manuals for Miele KM 7678 FR

Summary of Contents for Miele KM 7678 FR

  • Page 1 Operating and installation instructions Induction hobs To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-AE, SA M.-Nr. 11 271 100...

  • Page 2: Table Of Contents

    Controls and display ................... 15 Before using for the first time ................16 Cleaning the hob for the first time............... 16 Switching on the hob for the first time ..............16 Miele@home ......................17 Resetting settings................... 19 Con@ctivity......................20 Resetting settings................... 22 Induction ......................
  • Page 3 Contents Demonstration/showroom mode................. 37 Displaying hob data..................... 38 Safety features....................39 System lock/safety lock ..................39 Safety switch-off ....................40 Overheating protection..................41 Programming ..................... 42 Cleaning and care ..................... 45 Problem solving guide ..................47 Optional accessories ..................51 After sales service.....................

  • Page 4: Warning And Safety Instructions

    Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these instructions in a safe place and pass them on to any...
  • Page 5 Warning and Safety instructions Correct application  This hob is intended for domestic use and use in other similar environments.  This hob is not intended for outdoor use.  It is intended for domestic use only to cook food and keep it warm.
  • Page 6 Warning and Safety instructions Safety with children  Children under 8 years of age must be kept away from the hob unless they are constantly supervised.  Children over 8 years of age may use the hob without supervision if its operation has been clearly explained to them and they are able to use it safely.
  • Page 7  Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician.  Damage to the hob can compromise your safety. Check the hob for visible signs of damage. Do not use the hob if it is damaged.
  • Page 8 Miele authorised technician. Otherwise the warranty is invalidated.  Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts. ...
  • Page 9 Warning and Safety instructions Correct use  The hob gets hot when in use and remains hot for a while after being switched off. There is a danger of burning until the residual heat indicators go out.  Oil and fat can overheat and catch fire. Do not leave the hob unattended when cooking with oil and fat.
  • Page 10 Warning and Safety instructions  You could burn yourself on the hot hob. Protect your hands with heat-resistant pot holders or gloves when handling hot pots and pans. Do not let them get wet or damp, as this causes heat to transfer through the material more quickly with the risk of scalding or burning yourself.
  • Page 11 Warning and Safety instructions  Because induction heating works so quickly, the base of the pan could, under certain circumstances, heat up to the temperature at which oil or fat self-ignites within a very short time. Never leave the hob unattended during use! ...
  • Page 12 Warning and Safety instructions Cleaning and care  Do not use a steam cleaning appliance to clean this hob. The steam could reach electrical components and cause a short circuit.  If the hob is built in over a pyrolytic oven, the hob should not be used whilst the pyrolytic process is being carried out, as this could trigger the overheating protection mechanism on the hob (see relevant section).

  • Page 13: Caring For The Environment

    Please dispose of it at your local community waste collection / recycling centre or contact your Miele dealer for advice. Ensure that it presents no danger to children while being stored for disposal.

  • Page 14: Guide To The Appliance

    Guide to the appliance a Useable surface of the hob for a maximum of 6 pans b Controls and indicators...

  • Page 15: Controls And Display

    Guide to the appliance Controls and display Sensor controls a For switching the hob on and off b Stop & Go c Minute minder d Wipe protection e Switch off automatically f Keeping warm function g Numerical keybank - For setting the power level - For setting the timer Displays/indicator lights h Positioning aid...

  • Page 16: Before Using For The First Time

    Before using for the first time  Please stick the extra data plate for Switching on the hob for the the appliance supplied with this first time documentation in the space provided The metal components have a in the “After sales service” section of protective coating which may give off a this booklet.

  • Page 17: Miele@Home

    Before using for the first time Miele@home availability Miele@home The ability to use the Miele@mobile app Pre-requisite: Home WiFi network depends on the availability of the Miele@home service in your country. Your hob is equipped with an integrated WiFi module. The hob can be...
  • Page 18 Connecting via WPS Prerequisite: you must have a WPS Connecting via the app (WiFi protected setup) compatible The Miele@mobile app can be used to router. connect to your network.  Switch the hob on.  Install the Miele@mobile app on your mobile device.

  • Page 19: Resetting Settings

    Before using for the first time Cancelling the process  Touch any sensor control. Resetting settings Resetting is not required when replacing the router.  Switch the hob on.  Place an induction-compatible pan on the hob.  Touch and hold the 0 and 9 sensor controls on the numerical display at the same time for 6 seconds.

  • Page 20: Con@Ctivity

    Before using for the first time Setting up Con@ctivity Con@ctivity Con@ctivity is the direct communication Con@ctivity via the home WiFi system between an electric Miele hob network (Con@ctivity 3.0) and a Miele cooker hood. Con@ctivity Prerequisite: enables the cooker hood to operate...
  • Page 21  Quit connection mode on the cooker connection (Con@ctivity 3.0) hood by pressing the run-on control . Prerequisite: WiFi-enabled Miele Con@ctivity is now activated. cooker hood If you do not have a home network, you With a direct WiFi connection, it is not...

  • Page 22: Resetting Settings

    Before using for the first time Cancelling the process  Touch any sensor control. Resetting settings Resetting is not required when replacing the router.  Switch the hob on.  Place an induction-compatible pan on the hob.  Touch and hold the 0 and 9 sensor controls on the numerical display at the same time for 6 seconds.

  • Page 23: Induction

    Induction How it works Pans Induction coils are located under the Pan size ceramic surface. These coils create a Round pans should preferably have a magnetic field that reacts directly with base diameter from 145 mm up to a the base of the pan and heats it up. The maximum of 350 mm.
  • Page 24 Induction Unsuitable pans. Tips - stainless steel pans without a - Use only pans with smooth bases. magnetic base Rough pan bases can scratch the ceramic glass. - aluminium or copper pans - Always lift pans to move them. This - glass, ceramic or earthenware pots will help prevent scratching.

  • Page 25: Noises

    Induction Noises The following noises can occur in the pan, depending on what it is made of and how it has been constructed: Buzzing on the higher power settings. This will decrease or cease altogether when the power setting is reduced. If the pan base is made of layers of different materials (e.g.

  • Page 26: Tips On Saving Energy

    Tips on saving energy - Use a lid whenever possible to minimise heat loss. - Select a smaller pan when cooking small quantities. A smaller pan uses less energy than a larger pan with very little in it. - Cook with as little water as possible. - Once food has come to the boil or the oil in the pan is hot enough for frying, reduce the heat to a lower...

  • Page 27: Setting Ranges

    Setting ranges The hob is programmed with 9 power levels at the factory. If you wish to fine-tune a setting, you can extend the power level range to 17 power levels (see “Programming”). Setting range Factory Extended setting setting (9 power (17 power levels) levels) Melting butter 1–2...

  • Page 28: Operation

    Operation Using the appliance  Malfunction due to dirty and/or covered sensor controls. This ceramic hob is equipped with electronic sensor controls which react If the sensor controls are dirty or covered this could cause them to fail to finger contact. For safety reasons, in order to switch the appliance on, the to react, to activate a function or On/Off ...

  • Page 29: Positioning Cookware

    Operation Possible faults Positioning cookware You place a pan on the hob and the You can use a maximum of 6  pans at associated numerical keybank does not the same time on this hob. appear. Tips The pan cannot be detected in this position because it is very small.

  • Page 30: Switching On The Hob

    Operation Residual heat indicator  Risk of fire with overheated food. Unattended food can overheat and If the an area of the ceramic surface is catch alight. hot, the residual heat indicator will light up after the hob has been switched off. Do not leave the hob unattended Depending on the temperature, a dot whilst it is being used.

  • Page 31: Auto Heat-Up

    Operation Auto heat-up Continued Heat-up time cooking setting* [min : sec] When Auto heat-up has been activated, the cooking zone switches on Approx. 0:15 automatically at the highest setting and Approx. 0:15 then switches to the continued cooking setting which you have previously Approx.

  • Page 32: Booster

    Operation Activating TwinBooster Booster When activated, the power is boosted Level 1 so that large quantities can be heated  Place the pans in the required up quickly, e.g. when boiling water for position on the hob. cooking pasta. The boost in power is active for a maximum of 15 minutes.

  • Page 33: Keeping Warm

    Operation Activating/deactivating the keeping Keeping warm warm function This function is for keeping food warm  Touch the  sensor control on the which has just been cooked and is still corresponding numerical keybank. hot. It is not for reheating food that has gone cold.

  • Page 34: Timer

    Timer The hob has to be switched on if you The functions can be used at the same want to use the timer. time. The shortest time is always A duration of between 1 minute (:) displayed and the  sensor control and 9 hours 59 minutes (:) can be (minute minder) or the indicator light for automatic switch-off pulsates.

  • Page 35: Switch Off Automatically

    Timer touch the  sensor control Switch off automatically repeatedly until the indicator light for You can set a time after which the heat the pan you require flashes. for a pan will switch off automatically. This function can be used for all pans at Changing the switch-off time the same time.

  • Page 36: Additional Functions

    Additional functions Stop & Go Recall When Stop & Go is activated, all power If the hob is switched off by mistake levels are reduced to 1. during use, this function can be used to The power levels and the timer settings reset all settings. For this to work, the cannot be altered;...

  • Page 37: Wipe Protection

    Additional functions Activating/deactivating showroom Wipe protection mode The hob sensors can be locked for In showroom mode, cooking 20 s in order, for example, to remove processes are simulated in an infinite soiling. The  is not locked. loop. The sequence of the individual steps is repeated after 1 minute.

  • Page 38: Displaying Hob Data

    Additional functions Displaying hob data The model number and software version of the hob can be displayed. Model number/serial number  Switch the hob on.  Place an induction-compatible pan on the hob.  Touch and hold the 0 and 4 sensor controls on the numerical display at the same time.

  • Page 39: Safety Features

    Safety features Activating the system lock System lock/safety lock  Touch the  sensor for 6 seconds. Your hob is equipped with a system lock and a safety lock to prevent it The seconds can be seen counting being switched on or any settings being down in the timer display.

  • Page 40: Safety Switch-Off

    Safety features Safety switch-off Power level* Maximum operating time [h:min] Sensor controls are covered Safety setting Your hob will turn off automatically if one or several of the sensors remain 10:00 8:00 5:00 covered for longer than 10 seconds, for example, by finger contact, food boiling 10:00 7:00...

  • Page 41: Overheating Protection

    If, despite removing the cause, the - The set power level will be reduced. overheating protection mechanism triggers again, contact your Miele - The heat for a zone switches off dealer. automatically.  flashes alternately with  in the timer display.

  • Page 42: Programming

    Programming To save the settings You can adapt the programming of the hob to your personal needs. Several  While the programme is showing in settings can be altered in succession. the display (e. g. :) touch the  sensor until the indicators go out. After accessing programming mode, the  symbol appears and ...
  • Page 43 Programming Settings Programme Code P:01 Demonstration/showroom mode C:00 Demonstration mode off C:01 Demonstration mode on C:02 Showroom mode on P:02 C:00 Power management C:01 3680 W C:02 3000 W C:03 2000 W C:04 1000 W P:03 Factory default setting C:00 Factory default settings not restored C:01 Factory default settings restored P:04...
  • Page 44 Programming Settings Programme Code P:10 WiFi registration C:00 Not active/deactivated C:01 Active but not configured C:02 Active and configured C:03 Connection possible via WPS push button C:04 WiFi reset to default (C:00) C:05 Direct WiFi connection between hob and cooker hood without app (Con@ctivity 3.0) P:12 Sensor controls reaction speed...

  • Page 45: Cleaning And Care

    Cleaning and care  Clean the hob after every use.  Danger of burning due to hot surfaces.  Dry the hob thoroughly after cleaning with water to avoid limescale residue. The ceramic surface will be hot after use. Unsuitable cleaning agents Switch the hob off.
  • Page 46  Then carefully scrape off these residues immediately whilst they are  Then clean the ceramic glass surface still hot, using a scraper suitable for with the Miele ceramic and stainless use on glass. steel hob cleaner (see “Optional accessories”) or with a proprietary ...

  • Page 47: Problem Solving Guide

    There is no power to the hob. switched on.  Check whether the fuse has tripped. Contact an electrician or your Miele dealer (for the minimum fuse rating, see data plate). There may be a technical fault.  Disconnect the hob from the electricity supply for approx.
  • Page 48 Problem solving guide Issue Cause and remedy The hob has switched One or more of the sensor controls are covered, e.g. off automatically. When by finger contact, food boiling over or an object. the element is switched  Clean off any dirt and/or remove the object (see back on, ...
  • Page 49  alternating with  The hob is incorrectly connected. flashes in the timer  Contact your Miele dealer. The hob must be display. connected to the mains according to the wiring diagram. 1 and a number Fault in a zone (e.g. 1-0) is flashing...
  • Page 50  See “Safety features – Overheating protection”.  and other numbers There is a fault in the electronic module.  Disconnect the power supply to the hob for approx. 1 minute.  If the problem persists after power has been restored, please contact your Miele dealer.

  • Page 51: Optional Accessories

    (see end of this booklet for contact details). Removes heavy soiling, limescale Pans deposits and aluminium residues Miele offer a wide range of pans which Microfibre cloth are perfect for Miele hobs. Please contact your Miele dealer for more details on individual products.

  • Page 52: After Sales Service

    In the event of any faults which you cannot remedy yourself, please contact your Miele dealer. Contact details for your Miele dealer are given at the end of this document. Please note that telephone calls may be monitored and recorded for training purposes and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet.

  • Page 53: Installation

    *INSTALLATION* Installation Safety instructions for installation  Damage risk from incorrect installation. Incorrect installation can cause damage to the hob. The hob must only be installed by a qualified person.  Risk of electric shock. Incorrect connection to the mains supply may result in an electric shock. The hob must be connected to the electrical supply by a qualified person only.

  • Page 54: Safety Distances

    *INSTALLATION* Installation Safety distances Safety distance above the hob The safety distance specified by the manufacturer of the cooker hood must be maintained between the hob and the cooker hood above it. If combustible objects are installed above the hob (e.g., cabinets, utensil rail, etc.), a minimum safety distance of 600 mm must be maintained.
  • Page 55 *INSTALLATION* Installation Safety distances to the sides and back of the hob It is advisable to install the hob with plenty of space either side of it. The minimum distance  shown below must be maintained between the back of the hob and a tall unit or wall. The minimum distance , ...
  • Page 56 *INSTALLATION* Installation Minimum safety distance underneath Intermediate shelf the hob It is not necessary to fit an intermediate To ensure sufficient ventilation to the shelf underneath the hob, but one may hob, a minimum distance must be left be fitted if you wish. between the underside of the hob and Leave a gap of 10 mm at the back any oven, intermediate shelf or drawer.
  • Page 57 *INSTALLATION* Installation Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e.g. wood) a minimum safety distance ...

  • Page 58: Installation Notes

    *INSTALLATION* Installation Tiled worktops Installation notes Surface-mounted installation Seal between the hob and the worktop Grout lines  and the hatched area underneath the hob frame must be smooth and even. If they are not the hob will not sit flush with the worktop and the sealing strip underneath the hob will not provide a good seal ...

  • Page 59: Flush-Fit Installation

    *INSTALLATION* Installation Flush-fit installation Natural stone worktops The hob is set directly in the cut-out. Flush-fit installation is only possible in natural stone (granite, marble), solid Solid wood worktops, tiled worktops, wood and tiled worktops. Certain glass worktops models are suitable for building into The hob is secured inside the cut-out glass worktops –...

  • Page 60: Installation Dimensions - Surface-Mounted

    *INSTALLATION* Installation Installation dimensions – Surface-mounted All dimensions are given in mm. KM 7678 FR a Front b Mains connection box The mains connection cable (L = 1440 mm) is supplied loose...

  • Page 61: Km 7678 Fl, Km 7878 Fl

    *INSTALLATION* Installation KM 7678 FL, KM 7878 FL a Front b Mains connection box The mains connection cable (L = 1440 mm) is supplied loose...
  • Page 62 *INSTALLATION* Installation KM 7697 FR a Front b Mains connection box The mains connection cable (L = 1440 mm) is supplied loose...

  • Page 63: Km 7697 Fl, Km 7897 Fl

    *INSTALLATION* Installation KM 7697 FL, KM 7897 FL a Front b Mains connection box The mains connection cable (L = 1440 mm) is supplied loose...

  • Page 64: Surface-Mounted Installation

    *INSTALLATION* Installation Surface-mounted installation If the seal does not sit flush with the worktop in the corners, the corner  Create the worktop cut-out. radius (≤ R4) can be carefully cut to fit Remember to maintain the minimum using a jigsaw. safety distances (see “Installation –...

  • Page 65: Installation Dimensions - Flush

    *INSTALLATION* Installation Installation dimensions – Flush All dimensions are given in mm. KM 7678 FL, KM 7878 FL a Front b Mains connection box The mains connection cable (L = 1440 mm) is supplied loose c Stepped cut-out, natural stone worktop d Wooden batten 12 mm (not supplied)

  • Page 66: Km 7697 Fl, Km 7897 Fl

    *INSTALLATION* Installation KM 7697 FL, KM 7897 FL a Front b Mains connection box The mains connection cable (L = 1440 mm) is supplied loose c Stepped cut-out, natural stone worktop d Wooden batten 12 mm (not supplied)

  • Page 67: Flush-Fit Installation

    *INSTALLATION* Installation Flush-fit installation  Damage from unsuitable sealant.  Create the worktop cut-out. Unsuitable sealant can damage Remember to maintain the minimum natural stone. safety distances (see “Installation – For natural stone worktops and Safety distances”). natural stone tiles, only use silicone sealant that is specially formulated ...

  • Page 68: Electrical Connection

    Total power rating Electrical connection See data plate  Danger of injury. Miele cannot be held liable for Connection data unauthorised installation, The connection data is quoted on the maintenance and repair work as this data plate. Please ensure these match can be dangerous to users.
  • Page 69 (black) button springs out. connection cable, type H 05 VV-F (PVC- Built-in circuit breakers insulated), available from your Miele dealer.  Circuit breakers at least type B or C: Switch the lever from 1 (on) to 0 (off).
  • Page 70 *INSTALLATION* Installation Wiring diagram a b c d e 200-240 V~ 200-240 V~ 200-240 V~ (L3) 200-240 V~ 200-240 V~ b c d (L2) 200-240 V~...
  • Page 71 Tel. +966 11 2013501, Fax. +966 11 2013502 Taif Hadiya Street Tel. +966 12 7327001, Fax. +966 12 7369596 Khobar Al Zahran Road Tel. +966 13 8646150, Fax. +966 13 8646190 Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany...
  • Page 72 KM 7678 FR, KM 7678 FL, KM 7697 FR, KM 7697 FL, KM 7878 FL, KM 7897 FL en-AE, SA M.-Nr. 11 271 100 / 04...

This manual is also suitable for:

Km 7678 flKm 7878 flKm 7697 frKm 7697 flKm 7897 fl

Table of Contents