Mitsubishi Electric unisen 154 Series Basic Owner's Manual page 27

4. TV Menus 27
Language
* SeBect either EngUsh or Spanish for on-screen menus.
o SeBect the )anguage for a digita) program from the ANT input (if avaUabBe).
Note:
Set the TV c)ock to:
Use the TV Timer to power on the TV automaticaUy at a preset time
Receive correct updates to ChanneBView Ustings
When the Daylight Saving Time change occurs, you must open this menu and set the TV's clock ahead or back.
The Timer tells the TV to power on automatically at a time you set. Use this menu to set a day,
time, input, and channel for the Timer. If the TV is already on at the set time, the TV will auto-
maticaUy change to the designated channel or input.
The TV c)ock must be set before you can use the Timer feature.
As a reminder that the TV Timer is set, the TV POWER indicator flashes slowly while the TV is powered off.
When the Timer turns on the TV, press any key on the remote control to keep it from turning off after five minutes.
See "Memorizing Channels with Channel Scan" on page 9 to scan for all available channels
on the ANT input.
Edit
After channel scan, Edit lets you add and delete memorized channels.
Press PAGE DN/UPto jump to the next or previous page of channel numbers.
Press A V 4 _ to move through all channel numbers, one at a time.
Adding/Demeting Channems Using the Channem Edit Menu
* Channels marked with a check are in memory.
* To add or delete a channel from memory, highlight the channel number and press ENTER.
To add a single digital channel not in the list, see the full owner's guide at www.mitsubishi-tv.com.
BmueGmow
(265 series)
Power
On Via
Controm
Over IP
On, Off Select On to see blue accent lighting when the TV is powered on.
On, Off
Select On to allow TV power control over an internet connection. When enabled, the
powered-off TV consumes power in excess of ENERGY STAR guidelines for a powered-off
device.
Ethernet Connection
Wiremess Connection
See "Home Network Setup" on page 18.
For assistance ca((1(800} 332-2119