Mitsubishi Electric LT-46149 Owner's Manual
  1. Manuals
  2. Brands
  3. Mitsubishi Electric Manuals
  4. LCD TV
  5. LT-46149
  6. Owner's manual

Mitsubishi Electric LT-46149 Owner's Manual

Lcd flat panel hdtv
Hide thumbs Also See for LT-46149:
Table of Contents

Advertisement

Quick Links

LCD FLAT PANEL HDTV
MODELS
LT-46149
LT-52149
OWNER'S GUIDE
•
For questions:
-
Visit our website at www.mitsubishi-tv.com.
-
E-mail us at MDEAservice@mdea.com.
-
Call Consumer Relations at
•
For information on
System Reset, please see the back cover.
•
To order replacement or additional remote controls or Owner's Guides, visit our website at
www.mitsuparts.com or call 800-553-7278.
•
Guidelines for setting up and using your new widescreen TV start on page 12.
800-332-2119.

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi Electric LT-46149

Summary of Contents for Mitsubishi Electric LT-46149

  • Page 1 LCD FLAT PANEL HDTV MODELS LT-46149 LT-52149 OWNER’S GUIDE • For questions: Visit our website at www.mitsubishi-tv.com. E-mail us at MDEAservice@mdea.com. Call Consumer Relations at 800-332-2119. • For information on System Reset, please see the back cover. • To order replacement or additional remote controls or Owner’s Guides, visit our website at www.mitsuparts.com or call 800-553-7278.
  • Page 2 Record the model number, serial number, and Product: LCD Flat Panel HDTV purchase date of your TV. The model and serial Models: LT-46149, LT-52149 numbers are on the back of the TV. Refer to this page when requesting assistance with the TV. Responsible Mitsubishi Digital Electronics Party: America, Inc.

  • Page 3: Table Of Contents

    Contents Remote Control ......Important Information About Your TV ChannelView Channel Listings ....Important Safety Instructions .

  • Page 4: Important Safety Instructions

    Important Safety Instructions Please read the following safeguards for your TV and 10) Protect the power cord from being walked on retain for future reference. Always follow all warnings or pinched particularly at plugs, convenience and instructions marked on the television. receptacles, and the point where they exit from the apparatus.

  • Page 5: Installation And Operating Notes

    Installation Notes Cleaning Recommendations Wall Mount Requirements Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is For wall-mounting, see “Stand Removal,” page 11. needed, please use the following guidelines: Use with other than the authorized accessories may First, turn off the TV and unplug the power cord from cause the TV to become unstable, which can cause the power outlet.

  • Page 6: Television Overview

    Television Overview Package Contents Integrated HDTV Tuner Your widescreen Mitsubishi HDTV has an internal HDTV Please take a moment to review the following list of tuner able to receive both over-the-air HDTV broad- items to ensure that you have received everything. casts (received via an antenna) and non-scrambled digital cable broadcasts, including non-scrambled Remote Control...

  • Page 7: Tv Control Panel And Convenience Inputs

    1. Television Overview NetCommand for HDMI Sound Projector HDMI devices with Consumer Electronics Control (CEC) Sound Projector technology uses the TV’s bank of 16 capabilities may be compatible with the TV’s NetCom- speakers to create a simulated surround sound effect mand for HDMI feature.

  • Page 8: Tv Main Panel

    1. Television Overview TV Main Panel 1. ANT 1/ANT 2 (Antenna) HDMI If you are connecting an antenna or direct cable service without a cable box, connect the main antenna or cable VIDEO: 480i, 480p /720p source to ANT 1. Use ANT 2 for a second source. ANT 1 1080i /1080p and ANT 2 can each receive digital and analog over-the- AUDIO:...
  • Page 9 1. Television Overview TV Main Panel, continued Personal Computer,” page 18, and Appendix B, “Specifi- sound receiver or stereo system. Select AV Receiver cations,” page 69. when the Auto Output Sensing screen displays. Digital audio from digital channels and HDMI devices is These inputs are HDCP (High-Bandwidth Digital Copy converted to analog audio by the TV.
  • Page 10 1. Television Overview Front-Panel Indicators and IR Sensor STATUS POWER STATUS indicator. Off during normal TV operation. POWER/TIMER indicator. Lit when TV is powered on; flashes when TV is powered off and the auto-on TV Timer is set. IR Sensor IR Sensor (Infrared Sensor).

  • Page 11: Stand Removal

    1. Television Overview Stand Removal CAUTION At least TWO PEOPLE are needed to safely remove the stand. Have one person hold the TV while the other person removes the stand. Failure to follow these recommendations may result in personal injury and damage to the product.

  • Page 12: Tv Setup

    TV Set-Up Guidelines for Setting Up and Using Your New Widescreen TV Getting Started Review the important safety, installation, and oper- Installing the Remote Control ating information at the beginning of this book. Batteries Choose a location for your TV. •...
  • Page 13 2. TV Setup Guidelines for Setting Up and Using Your New Widescreen TV, continued Additional TV Setup TV Operation Review chapter 4, “TV Operation and Features,” for Review chapter 5, “TV Menus,” to customize TV TV features including: operation. Press the MENU key to enter the menu • Remote Control.

  • Page 14: Initial Tv Setup

    2. TV Setup Initial TV Setup • Use the Setup > Edit menu (page 47) for additional channel options, such as adding or deleting chan- Use the Setup menu for basic TV setup options. nels from memory, naming channels, and saving Press MENU to open the Main menu.
  • Page 15 2. TV Setup Setting Up TV Inputs, continued Auto Input/Auto Output Sensing Screens See below for how different connections are handled Auto Input Sensing for CEC-Enabled Devices by Auto Input/Auto Output Sensing. When the TV’s NetCommand for HDMI feature is enabled, •...

  • Page 16: Controlling A/V Receiver Sound Volume

    2. TV Setup Controlling A/V Receiver Sound Volume Setting Up TV Inputs, continued Use one of the methods below to control sound volume from Tips on Auto Sensing and Changing the A/V receiver. Connected Devices With a Standard TV Setup •...
  • Page 17 2. TV Setup About Home-Theater Control Systems This summary offers some examples of the control methods available using the TV’s remote control. You may wish to use one or more of these methods in your home theater after completing Auto Input Sensing. Source device connected directly to the TV Remote Control Programming with Any Connection Type Any Connection Type...

  • Page 18: Using The Tv With A Personal Computer

    2. TV Setup Using the TV with a Personal Computer Connecting a Computer to the TV Use one of the connection methods listed below based Computer with HDMI HDMI on your computer’s video output. DVI and stereo audio outputs Computer Audio Video Connection Video Output...
  • Page 19 2. TV Setup Using the TV with a Personal Computer Computer Video Adjustments Tip: Power on the computer if it is not already on. Set the computer’s screen saver to display a pattern after several minutes of inactivity. This acts as a PC from the Input Selection menu.

  • Page 20: Using A Cablecard

    2. TV Setup Using a CableCARD In order to start cable service for this device, please contact The CableCARD™ system allows your TV to receive, your cable provider decode, and unscramble the premium digital channels 1-800-xxx-xxxx included in your cable TV subscription without the use CableCARD(tm): xxx-xxx-xxx-xxx-xxx-x of a cable box.

  • Page 21: Tv Connections

    TV Connections Before You Begin Surround Sound Auto Input Sensing For best surround sound audio quality, route audio- The TV’s Auto Input Sensing feature automatically rec- signal cables or HDMI cables from the source device ognizes most connections and prompts you to identify directly to your A/V receiver or sound system.

  • Page 22: Hdtv Cable Box Or Satellite Receiver, Dvd Player, Or Other Device With Component Video

    3. TV Connections HDTV Cable Box or Satellite Receiver, DVD Player, or Other Device with Component Video If your cable box or satellite receiver has an HDMI output, use the connections for HDMI devices described on this page. HDMI Required: RCA component video cables, left/right analog stereo audio cables.

  • Page 23: Dvi Video Device

    3. TV Connections DVI Video Device (Cable Box, Satellite Standard Cable Box, Satellite Receiver, Receiver, DVD Player, or Other Device) or Other Device with S-Video Connect DVI devices (digital only) to the TV’s HDMI Required: S-Video cable and left/right analog stereo input jacks.

  • Page 24: Wall Outlet Cable (No Cable Box)

    3. TV Connections Wall Outlet Cable (no cable box) Antennas with Separate UHF and VHF Leads (can be used with a CableCARD™) You must connect the incoming cable for your Required: UHF/VHF combiner primary viewing source to ANT 1/MAIN, especially for Connect the UHF and VHF antenna leads to the CableCARD™...

  • Page 25: Vcr To An Antenna Or Wall Outlet Cable

    3. TV Connections VCR to an Antenna or VCR to a Cable Box (Audio & Video) Wall Outlet Cable Required: Two-way RF splitter, three coaxial cables, right and left audio cables, S-Video or composite video Required: Two-way RF splitter, two coaxial cables, right cable, plus video and audio cables required to connect and left analog audio cables, either S-video or compos- the TV to the cable box.

  • Page 26: Older Cable Box

    3. TV Connections Audio-Only Device Connect either an S-Video or composite video cable from VIDEO OUT on the VCR back panel If you wish to connect an audio-only device to the TV, such to a VIDEO composite or S-VIDEO jack on the TV as an audio CD player or an MP3 player, follow these instruc- main panel.

  • Page 27: A/V Receiver (Sound System) Using The Tv's Audio Output

    3. TV Connections A/V Receiver (Sound System) Using A/V Receiver with HDMI Output the TV’s Audio Output Required: One HDMI-to-HDMI cable Most setups require either a digital audio cable or analog This option allows you to view content from devices stereo audio cables.

  • Page 28: Camcorder

    3. TV Connections B: Composite Video Connection Camcorder Required: Composite video and analog stereo audio Convenience input jacks on the TV’s cables supplied with the camcorder. side panel offer the easiest way to Connect the composite video cable from VIDEO connect a camcorder.

  • Page 29: Tv Operation And Features

    TV Operation and Features Choosing a Viewing Source Sleep Timer The Sleep Timer turns the TV off after the length of time you set. To set the TV to turn on at a certain time, see the Setup > Timer menu on page 49. Setting the Sleep Timer Press SLEEP on the remote control.

  • Page 30: Remote Control

    4. TV Operation and Features Remote Control 1. POWER: Turns TV power on and off. 2. Slide Switch: Selects the A/V device to be oper- ated by the remote control. Set the slide switch to TV for operation of the TV, and NetCommand- controlled devices.

  • Page 31: Channelview Channel Listings

    4. TV Operation and Features Remote Control, continued Care of the Remote Control receivers, and DVD players. Program the remote control for your equipment and test the keys. See • Use only alkaline batteries. Appendix C, “Programming the Remote Control.” •...

  • Page 32: Status Display

    4. TV Operation and Features Status Display Ant 1 7-1 KABC-HD Monday Night Football Press the INFO key to see the HD 16:9 Standard St. Louis vs. Tampa Bay on-screen status display. TV-PG FAV1 The most common displays Stereo English are shown here.

  • Page 33: Fav (Favorite Channels)

    4. TV Operation and Features Fav (Favorite Channels) Use the six Fav channel banks to store groups of your ANT-1 favorite channels from ANT 1 and ANT 2. You can set 480i Stretch up a Fav channel bank for each of your favorite program FAV2 TV-PG types or set up a bank for each TV user.

  • Page 34: Tv Signals And Display Formats

    4. TV Operation and Features TV Signals and Display Formats This is a 16:9 widescreen TV suitable for images avail- Original Non-anamorphic or able from HDTV and many DVDs. You can view older- Signal Anamorphic DVD SD 4:3 style squarish images (4:3 aspect ratio) using one of the Display display formats described on this page.

  • Page 35: Viewing Camera Files And Galleryplayer Images

    4. TV Operation and Features Viewing Camera Files and GalleryPlayer Images JPEG Images and the USB Photo Port JPEG Thumbnail Menu For instructions on viewing the Use these keys while viewing JPEG thumbnail images. GalleryPlayer demo or to pur- Not all keys are available with GalleryPlayer files. chase images, see page 50.

  • Page 36: Composite Video

    4. TV Operation and Features Slide Show USB Photo Menu Compatible Picture Files Use these keys during the slide show. Not all functions • Still images recorded on digital cameras using the are available for GalleryPlayer slide shows. Exchangeable Image File Format, version 2.1 (EXIF 2.1) standard for digital still cameras and Design Keys for JPEG Picture Slide Show Rules for Camera File Systems version 1.0 (DCF 1.0)

  • Page 37: Tv Menus

    TV Menus Main Menu Press MENU on the remote control to open the Main menu. Icon Menu Name and Description Page AV Menu Customize picture and sound settings. Turn closed captions on and off; customize Captions Menu caption displays. Perform basic TV setup. Set language, scan (memorize) channels, set the TV clock, edit Setup Menu channel options, lock TV use by channel, set...

  • Page 38: Av Menu

    5. TV Menus AV Menu An on-screen slider displays when making some audio and video adjustments. Numeric values represented on the slider range from 0 (minimum) to 63 (maximum), with 31 as the mid-point. The AV menu contains sub-menus for audio and video adjustments AV Menu Options Video...
  • Page 39 5. TV Menus AV Menu, continued AV Menu Options Video Mute On, Off • Displays a solid blue background when there is no video signal from the current input. Global Use the On setting to let the colored screen remind you that the TV is powered on at times when there is no picture.

  • Page 40: Sound Projector

    5. TV Menus AV Menu, continued Sound Projector The TV’s bank of 16 speakers can be adjusted to reflect sound off the room walls to create a surround sound effect. See also Sound Mode options in the Audio > Sound Mode menu on page 44. Sound Projector menu AV Menu Options TV Location...
  • Page 41 5. TV Menus AV Menu, continued Sound Projector CUSTOM Options Highlight CUSTOM and press ENTER to open the adjustment screen. Sound Projector CUSTOM Options Left Angle • Press to select an Right Angle audio beam; colors of the Center Angle adjusters correspond to Left Surround Angle audio beams in the on-...

  • Page 42: Video Menu

    5. TV Menus Video Menu Mitsubishi recommends you assign names to TV inputs before making video adjustments (use the Inputs > Name menu). Otherwise, adjustments will be reset to the defaults if you name inputs afterwards. To make video adjustments: From the Video menu: •...

  • Page 43: Audio Menu

    5. TV Menus Audio Menu To make audio adjustments: • From the Audio menu: Press to highlight an option Press to display the submenu and adjust. MENU to return to the AV menu. Press • While watching TV: Press the AUDIO key repeatedly to display the audio option you want to change.
  • Page 44 5. TV Menus Audio Menu, continued Audio Menu Options Sound Mode Stereo No special audio effects from the TV speakers. Surround sound is played as stereo. Surround Stereo is heard as simulated surround sound from the TV speakers. Surround sound is played as intended. See details at the bottom of this page. Night Turns off surround sound effects and allows you to direct sound to a single area to avoid disturbing others outside the room.

  • Page 45: Captions Menu

    5. TV Menus Captions Menu Captions on Digital Channels Captions on Analog Channels The TV can decode captions from ANT 1/ANT 2 only. The TV can decode captions from ANT 1/ANT 2 and the Broadcasters can send up to six different captioning VIDEO composite and S-VIDEO jacks.

  • Page 46: Setup Menu

    5. TV Menus Setup Menu Use the Setup menu to: • Select English or Spanish for menus and on-screen text. • Scan the channels available for the antenna or cable service connected to the ANT 1 or ANT 2 jacks. •...
  • Page 47 5. TV Menus Setup Menu, continued Edit Virtual Channel Number (digital channels only). A channel number sent by a local broadcaster. Usually the virtual number is associated with the corresponding analog channel number. For example, a broadcaster may associ- ate digital channel 2-1 with their analog channel 2. Physical Digital Channel Number.
  • Page 48 5. TV Menus Clock If you have enabled the TV Guide Daily system, there is no need to set the clock; settings are grayed out and unavailable. If TV Guide Daily is not enabled, set the clock if you wish to: • Use the TV’s Timer function.
  • Page 49 5. TV Menus Setup Menu, continued Setup Menu Options Timer On, Off Use the Timer to set a time for the TV to turn on automatically. Use this menu to set a day, time, Timer input, and channel for the Timer. If the TV is already on at the requested time, the TV will automati- cally tune to the designated channel.
  • Page 50 5. TV Menus Setup Menu, continued GalleryPlayer Use this TV’s GalleryPlayer feature to display beauti- ful high-definition images on your TV. A set of sample images is included with the TV. Setup > GalleryPlayer options Setup Menu Options Demo Mode ENTER to begin play of the sample GalleryPlayer •...

  • Page 51: Inputs Menu

    5. TV Menus Inputs Menu Inputs Menu Options Cable Box, Camcorder, CD/ • Lets you assign or change names of inputs appearing in the Audio, DVD (DVD, DVD2, Input Selection menu. Name Blu-Ray), DVR, Game (Game, Press to move between inputs. PS, Xbox, Wii), MP3 Player, PC, Press to select a name.

  • Page 52: Lock Menu

    5. TV Menus Lock Menu TV locks available from the Lock menu are: Lock by Ratings Parent Restrict access to programming based on V-Chip rating signals sent by the broadcaster. Other Lock by Time Time Restrict TV use by time of day. Lock Control Panel The Lock >...
  • Page 53 5. TV Menus Lock Menu, continued Parent Menu Options (U.S.-based rating system) Option Name and Description Lock Off, On Disables or enables program blocking based on V-Chip signals and the U.S. rating system. TV-Y Youth. For children under 7. Highlight the rating level Rating you wish to change and TV-Y7...

  • Page 54: Control Panel

    5. TV Menus Lock Menu, continued Other Menu Options (alternate rating system) This TV can recognize new rating systems that may come into effect in the future. The Other option remains grayed out until the TV receives a signal using an alternate rating system. Such alternate rating systems will apply only to digital programming received on the ANT 1 and ANT 2 inputs.

  • Page 55: Netcommand Ir Control

    NetCommand IR Control About NetCommand IR Control Note: To learn about NetCommand for HDMI devices, • You can choose the level of NetCommand control see Appendix E and “About Home-Theater Con- for your home theater. trol Systems,” page 17. Standard Setup. Perform a standard setup if • NetCommand setup is optional. you want NetCommand to control only a few devices, such as the TV, a playback device (like • You may wish to use NetCommand IR control to...

  • Page 56: Ir Emitter Placement

    6. NetCommand IR Control IR Emitter Placement Other A/V Device HDMI An IR emitter cable is included with the TV. The NetCommand system uses emitters connected to the IR—NetCommand Output jack to control other devices such as DVD players, cable boxes, satellite receivers, and VCRs.

  • Page 57: Initial Netcommand Setup For Most Devices

    6. NetCommand IR Control Initial NetCommand Setup for Most Devices To perform this procedure, you need: • The remote controls for both the TV and the device you want to control. • The IR emitter cable supplied with the TV. Note: To set up an A/V receiver, see “Setting Up NetCommand Control of an A/V Receiver,”...

  • Page 58: Netcommand Specialized Device Keys

    6. NetCommand IR Control NetCommand Specialized Device Keys Refer to this chart when “learning” device keys. “Learn” See the following page for more on keys marked in the some, all, or none of the keys used for each device “Special Operation Method” column. type.

  • Page 59: Operating Netcommand-Controlled Devices

    6. NetCommand IR Control Operating NetCommand-Controlled Devices Controlling Most Device Types Controlling an A/V Receiver As an example of NetCommand control, if you are watch- See page 61 to set up control of an A/V receiver. ing your cable box and you wish to tune to the next Switching Audio to and from the A/V Receiver channel higher, press CH/PAGE .
  • Page 60 6. NetCommand IR Control Operating NetCommand-Controlled Devices, continued Key Name in Special Operation Description and Setup How to Use Learning Screen Guide Displaying the Disc Menu (DVD or high-defini- While watching the device, press GUIDE to display the tion disc format) disc menu.

  • Page 61: Setting Up Netcommand Control Of An A/V Receiver

    6. NetCommand IR Control Setting Up NetCommand Control of an A/V Receiver Several types of A/V receiver control can be set up AV Receiver screen. using the Inputs > AV Receiver menu, shown on the Perform NetCommand following pages. IR “learning” for A/V •...
  • Page 62 6. NetCommand IR Control Setting Up NetCommand Control of an A/V Receiver, continued A/V Receiver Control: Automatic Audio Switching Perform one of these setups to enable the A/V receiver ment. To switch both audio and video via an HDMI to switch automatically to the correct audio input when connection, see page 65.
  • Page 63 6. NetCommand IR Control Setting Up NetCommand Control of an A/V Receiver, continued Before You Begin Audio Switching Setup 1: Automatic A/V Receiver Switching to the TV Audio Input Connect your A/V devices to the TV and connect Most devices are set up to use the TV’s audio output like your A/V receiver to the audio outputs on the TV the VCR in this example;...
  • Page 64 6. NetCommand IR Control Setting Up NetCommand Control of an A/V Receiver, continued A/V Receiver Control: Automatic Audio Audio Switching Setup 2: Automatic A/V Receiver Switching to a Surround Sound Device and Video Switching via HDMI Use this setup to send digital surround sound directly If your A/V receiver has an HDMI output, you can use from a device to an A/V receiver.
  • Page 65 6. NetCommand IR Control Setting Up NetCommand Control of an A/V Receiver, continued Setup to Control A/V Receiver Power and Volume Perform the steps under “A/V Receiver Control: Power Cable box TV main and Volume,” page 61. DVD player panel Setup to Control Switching to the TV’s Audio Output High-definition HDMI...
  • Page 66 6. NetCommand IR Control Setting Up NetCommand Control of an A/V Receiver, continued Press EXIT if finished or repeat these steps for addi- tional video sources connected to the A/V receiver. NetCommand IR Control: Device Connected to an A/V Receiver Use this setup to have NetCommand control a device sending audio and video through the A/V receiver to the TV via HDMI.

  • Page 67: Appendices

    Appendices Appendix A: Bypassing the Parental Lock Bypassing the Parental Lock After you set the lock, you must use your pass code to view a locked program, view the locked TV, view a locked channel, cancel the lock, or enter the Lock menus.
  • Page 68 Appendices This page intentionally left blank...

  • Page 69: Appendix B: Specifications

    With Stand/Without Stand input F connector, 75-ohm Model Height Width Depth Weight (lbs.) HDMI (digital CEA-861D standard for digital audio video/audio) and video via HDMI LT-46149 29.9/28.2 42.0 14.1/4.8 71.4/64.4 HDMI standard connector LT-52149 33.3/31.6 47.6 14.1/4.8 83.8/76.8 Video: 60 Hz: 480i, 480p, 720p, 1080i...

  • Page 70: Appendix C: Programming The Remote Control

    Appendices Appendix C: Programming the Remote Control This appendix explains programming the TV’s remote VCRs and DVRs control to operate other A/V devices. This is distinct • CH from NetCommand control. The TV’s remote control • (RECORD) • POWER can operate other devices by three different methods: •...

  • Page 71: Programming The Remote Control

    Appendices Appendix C: Programming the Remote Control, continued Programming the Remote Control Once you have found the correct code, write it in the space below for future reference. Move the slide switch at the top of the remote to the position for the product you want to control. Switch Position Device Type Code...

  • Page 72: Programming Codes

    Appendices Appendix C: Programming the Remote Control, continued Programming Codes Audio Amplifiers Cable Boxes CD Players Cable Boxes Make Code Make Code Make Code Make Code Acurus 30765 Signal 10040, 10011 Hitachi 30032 ClearMax 10883 Adcom 31100, 30577 Signature 10011 Inkel 30180, 30157 Comtronics 10040 Altec Lansing 31742 SL Marx 10040 Integra...
  • Page 73 Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued CD Players A/V Receivers Satellite Receivers A/V Receivers Make Code Make Code Make Code Make Code 30157 Nakamichi 31555, 31313, 30097 AlphaStar 10772 Amplifier 31584 Sansui 30157, 30000 Onkyo 31805, 31320, 31298, Bell ExpressVu 11170, 10775 Technologies Sanyo 30179, 30087, 30000...
  • Page 74 Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued Satellite Receivers VCRs VCRs VCRs Make Code Make Code Make Code Make Code Uniden 10724, 10722 20000 Optimus 21262, 21162, 21062, DirecTV 20739 Zenith 11856, 11810, 10856 21037, 20240, 20038, 21048, 20593, 20432, Dual 20000 20240, 20162, 20104, 20037 Durabrand...
  • Page 75 Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued VCRs DVD Players DVD Players VCRs Make Code Make Code Make Code Make Code Sanyo 20479, 20240, 20159, California 20490 20783 Vector 20184, 20038 20104, 20047, 20046, Audio Labs Jaton 21078 Research 20000 Celestial 21020 Vextra 20072 20702...
  • Page 76 Appendices Appendix C: Programming the Remote Control, continued Programming Codes, continued DVD Players DVD Players DVD Players DVD Players Make Code Make Code Make Code Make Code Polk Audio 20539 Sony 21536, 21533, 21516, United 20730 Samsung 21075, 21044, 20820, Portland 20770 21431, 21070, 21033, Universum 20591 20744, 20573, 20490, Presidian...

  • Page 77: Appendix D: Tv Guide Daily

    Appendices Appendix D: TV Guide Daily Active Selection Program Source and Channel Rating Icons Information Progress Info Box Info Bar Clock Info Icon Indicator Video Window Program Title Tile Highlighted Tile (indicates active Ad Panel selection) (high-definition) Channel Icon Channel Number Call Letters Main Guide Screen Elements This appendix explains the free TV Guide Daily service available with this TV.
  • Page 78 Appendices Appendix D: TV Guide Daily, continued Setting Up TV Guide Daily Navigating the Guide Setup of the TV Guide Daily system is optional. To navigate within the Guide, move the highlight through the screen using the TV remote control’s Display the Inputs > Guide menu to display TV CH/PAGE keys.
  • Page 79 Appendices Appendix D: TV Guide Daily, continued 2. In the Setup Screen, press to highlight “Display From the Guide Setup screen, you can change the setup progress” and press ENTER. The Setup Prog- channel lineup, change channel display settings, and ress screen appears. view setup progress (e.g., when the next listings update will occur).
  • Page 80 Appendices Appendix D: TV Guide Daily, continued Procedure auto, off). When correct, press to move the highlight to another position on the grid to While in the Guide Listings, press MENU. This dis- save changes. plays the Setup Screen. o change tune channel number* (Channel •...

  • Page 81: Appendix E: Netcommand Hdmi Control Of Cec Devices

    Appendices Appendix E: NetCommand HDMI Control of CEC Devices Many new HDMI devices have a feature called CEC Turn on the device and allow it to complete the (Consumer Electronics Control) or HDMI Control. power-on sequence (boot up). Mitsubishi calls this feature NetCommand HDMI Control Connect the device to one of the TV’s HDMI inputs.
  • Page 82 Appendices Appendix E: NetCommand HDMI Control of CEC Devices, continued • Figure 4 (NetCommand HDMI Control is off). Cable box DVD player The TV’s NetCommand for HDMI Control is HDMI turned off. Action: Follow the instructions in “Enabling or HDMI HDMI Cable Disabling the TV’s NetCommand HDMI Control” Cable on the previous page.
  • Page 83 Appendices Appendix E: NetCommand HDMI Control of CEC Devices, continued Resolving CEC Conflicts, Changing HDMI Connections, Removing HDMI Devices Because each manufacturer selects which CEC func- tions to support, some devices can conflict with other devices. If control conflicts arise, you can: • Turn off CEC in the other device’s setup menu. •...

  • Page 84: Appendix F: Troubleshooting

    Appendices Appendix F: Troubleshooting TV Reset Comparison Guide channel (a channel from ANT 1, ANT 2, a cable box, or satellite receiver), first check other channels from the You can resolve many common TV problems using same input before changing settings. If most other the reset functions described in the following table.
  • Page 85 Appendices Appendix F: Troubleshooting, continued Reset Name When to Use How to Use Resulting Action Control-Panel To re-enable the Press and hold the MENU button Allows the control panel to be Lock Release control-panel buttons on the control panel for over eight unlocked if the remote control is after activation of the seconds.
  • Page 86 Appendices Appendix F: Troubleshooting, continued General TV Operation Symptom Remarks The TV remote control does not work. • Check that the batteries are fresh and installed correctly. • Check that the slide switch on the remote is set to TV. • Be no more than 20 feet from the TV when using the remote control. •...
  • Page 87 Appendices Appendix F: Troubleshooting, continued TV Channels Symptom Remarks You cannot access a channel. • Use number keys instead of CH • Be sure the channel you want to view is in memory. See Setup > Scan on page 46. • Check that the TV is switched to the correct device or antenna for that channel by pressing the INPUT key. • Make sure Channel Lock is off. • Make sure the Lock > Parent menu lock is set to off. • If you cannot tune to a virtual digital channel even though the TV has already memorized digital channels, tune to the physical channel number used by the broadcaster.
  • Page 88 Appendices Appendix F: Troubleshooting, continued Picture Symptom Remarks VCR or DVD player’s on-screen menus jitter up Possible cause: Many VCRs and DVD players provide on-screen and down. menus at only half-resolution. These lower-resolution graphics may appear to jitter up and down when the TV converts them to high-defini- tion graphics.
  • Page 89 Appendices Appendix F: Troubleshooting, continued Indicators Symptom Remarks STATUS indicator light is a steady red. • Room temperature has exceeded proper levels. Cool the room. • The TV has overheated. Clear blocked air vents and ensure at least four inches of clearance on all sides of the TV. STATUS indicator light is a steady/flashing red. • Unplug set from AC power. Plug back in and wait one minute for blinking to stop. • Press SYSTEM RESET button and wait for blinking to stop. •...

  • Page 90: Trademark And License Information

    Appendices Appendix F: Troubleshooting, continued NetCommand IR Control Symptom Remarks There is no sound or picture from the A/V receiver NetCommand A/V receiver setup is not switching audio and video for my DVD player or other device connected to the inputs properly. See “Setup to Control Automatic Audio and Video A/V receiver;...

  • Page 91: Mitsubishi Tv Software

    Appendices Mitsubishi TV Software END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television (“Software”). By utilizing this television and Software, you agree to be bound by the terms of this License Agreement.
  • Page 92 Warranty MITSUBISHI LCD FLAT PANEL HDTV LIMITED WARRANTY MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants to the original purchaser of this LCD Flat Panel HDTV that if purchased from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of improper workmanship and/or material: a.
  • Page 93 Warranty arising from product installation, removal from or re-installation into custom installations or on wall mountings, or set-ups, any adjustments of user controls (including contrast, brightness, color, tint, fine tuning, sharpness), other adjustment necessary to prepare the unit for display or use, connection with any external audio receiver, antenna, cable or satellite systems, or service of products purchased or serviced outside the U.S.A.

  • Page 94: Index

    Index Index Channels Game Add Single Channel to Memory Game as Input Name 51 46, 47 Game Picture Mode 42 antennaweb.org 46 HDMI Cables for Games 9 Adjust Keys (Up/Down/Left/Right) Changing Channels 29 Global Menu 39 30, 37 Channel Lock 47 GUIDE Key 30, 70 Anamorphic Picture Format 34 Digital Channel Numbers 69...
  • Page 95 Index Lock TV Bypassing the Lock 67 Time. See Clock QV Key (QuickView™) 30 Lock by Channel 47 Timer (auto-on) 49 and FAV Key 33 Lock by Ratings 53 Time Zone. See Clock Lock by Time 54 Troubleshooting 84 Lock Control Panel 54 Ratings (TV and Movie) 53 TV Guide Daily Preset V-Chip Blocking 52...
  • Page 96 Website: www.mitsubishi-tv.com E-mail: MDEAservice@mdea.com For questions, call Consumer Relations at 800-332-2119 To order replacement or additional remote controls or Owner’s Guides Visit our website www.mitsuparts.com or call 800-553-7278 SYSTEM RESET If the TV does not respond to the remote control, control-panel buttons, or will not power on/off, press the SYSTEM RESET button on the control panel.

This manual is also suitable for:

Lt-52149

Table of Contents