Mitsubishi Electric unisen 154 Series Basic Owner's Manual page 25

4. TV Menus 25
Pict.re,contin.ed
o Resets sound and picture adjustments for the current input. Highlight the Reset icon
and press ENTER twice to perform reset,
Reset has no effect on universal settings (Balance, Listen To, Language) or on
Advanced picture settings.
(PerfectColorTM/PerfecTintTM) 265 Series. Sliders let you adjust the saturation (intensity)
and hues of six separate colors for the current image source.
Advanced Modes. Contact your professional installer for setup.
164 Series, Special/ADV,
265 Series. mSFDayiADVl, mSFNight/ADV2
Settings in this menu are saved for the current input only. To make audio adjustments:
From the Sound > Audio menu While watching TV
[_ 1o Press _, V to highlight an option 1o Press the AUDI0 key.
2. Press _ _ to adjust. 2. Press A V to select an audio option.
3o Press _ _ to change the setting.
TV Speakers On Turns on the internal TV speakers.
Off Turns off the internal TV speakers so you hear sound only through a connected device
(A/V receiver or headphones).
Center Makes the TV's speaker array act as a center channel. Sound >G/oba/ > Center
Channel must be set to On to use this option. See the detailed owner's guide at
www.mitsubishi-tv.com for use of this feature.
Bass Controls bass sound from the TV speakers.
Trebme Controls high-pitched sound from the TV speakers.
Bamance Controls audio balance between the right and left TV speakers (Sound Mode Stereo only)
Subwoofer [Subwoofer level Adjusts the volume level of a connected subwoofer. Set Sound > Global > Sub-
adjustment] woofer to On to make this adjustment available.
Sound Mode Stereo No special audio effects from the TV speakers
Surround Modifies audio from the TV speakers.
For monaural (non-stereo) programs, creates a simulated stereo effect.
For stereo programs, creates a simulated surround sound effect.
The TV's speaker array play's surround sound if available.
Music Optimizes the TV's speaker array for music listening.
Night Focuses the TV's speaker array to a single point to limit sound heard by others
outside the room. Press ENTER to adjust the focal point (Night Angme).
Levem Sound On, Off Reduces differences in sound volume between programming segments.
For assistance ca((1(800} 332-2119