Mitsubishi Electric unisen 154 Series Basic Owner's Manual page 15

2. TV Connections 15
Most setups require either an optical audio cable or
analog stereo audio cables. To send audio from TV
channels received on the ANT input or devices con-
nected directly to the TV, you must use one of the con-
nections shown below.
The TV makes all audio available in digital and analog
formats:
• Analog audio coming into the TV is available as
output in digital stereo format on the DIGITAL
AUDIO OUTPUT jack.
Digital incoming audio is available as analog output
on the AVR/SURROUND L and R jacks.
0pticam cable
(digital AN
receiver)
DIGITAL
I_1 AUDIO
I _ OUTPUT
f:2:
I
Stereoanalog cables
{analogAN receiver)
Required: One HDMI-to-HDMI cable
This option allows you to view content from devices
connected to an A/V receiver. The A/V receiver can
send audio and video to the TV over a single HDMI
cable. You can use an HDMI connection as described
here in addition to an audio connection from the TV's
audio output. The optional audio connection allows you
to hear, through the A/V receiver, devices connected to
the TV only, e.g., an antenna on the ANT input.
HDMI cable
t
DIGITAL
AUDIO
OUTPUT
AN receiver with
HDiVlloutput
Any connection
types
HDMIOUT
OPTICAL
AUDIO IN
R L
ANALOGAUDIOIN
A/V receiver back panel
For assistance call 1(800) 332-2119