Yamaha PASC4 Owner's Manual page 33

Table of Contents

Advertisement

Main riding
display
[ ]
[S---]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
Settings
The display enables the following.
ClockAdjust (Clock Adjust)
Clock setting
DistanceUnit (Distance Unit)
km/mile setting
DisplayItem (Display Item)
Sets the items to be displayed in the function display
during normal riding.
RecordReset (Record Reset)
Resets the values of the trip meter, average bicycle
speed, maximum bicycle speed, and trip time.
Brightness
[S]
Set the brightness of the display backlight.
LightMemory (Light Memory)
[S]
Sets whether to ignore or save the on or off status of
the headlight when the power of the e-Bike Systems is
[S]
turned off.
[S]
1. Press the function select switch for 2 seconds or long-
er.
[S]
2. Select an item by using the assist mode switches (up)
[S]
or (down).
When you select an item to set and press the function
[S]
select switch, the setting will be displayed.
WARNING
For all setting procedures, be sure to stop the bicycle
and perform the required settings in a safe location.
Otherwise, lack of attention to surrounding traffic or
other hazards could cause an accident.
TIP
The settings cannot be adjusted while riding.
If you do the following during setting, the item that you
are setting will be canceled and the display will return
to the main riding display.
Turning the crank (pedal) in the traveling direction
Turning the rear wheel at 1.2 mph (2 km/h) and more
Pushing the walk assist switch
[S---]···· Press the function select switch for 2 seconds or
longer
[S]······· Press the function select switch
[
] ······· Press the assist mode switch (up)
¤
[
] ······· Press the assist mode switch (down)
¦
29
main riding display.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pasc8Pasc11

Table of Contents