Table of Contents
Advertisement
4. Remove the protective film from the cleaning sheet.
Note: Do not touch the adhesive on the sheet (the dark gray area).
5. With the adhesive facing toward you, insert the cleaning sheet on the left side of the printer until it
reaches the end of the roll paper feed slot, then pull it out. Repeat this two to three times. Repeat for
the center and right side of the roll paper feed slot.
Note: If the cleaning sheet gets fed through the printer, select the
cleaning sheet.
6. Select Cancel on the LCD screen.
Note: If you want to stop a pending job, press the
to continue a job, load the correct paper to print on.
power button to turn off the printer. If you want
190
icon and then remove the
Advertisement
Table of Contents
