Blomberg BLPE 1 User Manual page 35

7 Troubleshooting
Problem
Coffee is delivered too
slowly or a drop at a time.
The indicator flashes to
inform that there's not
enough coffee beans, but
there are plenty inside the
container.
The brewer or the coffee
ground tray is impossible
to remove.
The appliance no longer
performs the rinsing cycle
when switched on or off.
The touch buttons are not
sensitive.
Fully Automatic Coffee Machine / User Manual
Cause
Coffee grounds are too fine,
which blocks the water from
coming out.
The internal coffee grounds
outlet is blocked.
The appliance did not finish the
self-cleaning process and was
switched off .
Improper handling when ser-
vicing the appliance may be
the cause.
Not pressing the touch button
from the front of the appliance.
Solution
Adjust the coffee fineness to
larger grains for the grinding
process.
Follow the steps described
for cleaning the coffee
grounds outlet.
Please switch on the ma-
chine again and let it finish
its auto cleaning process.
1. When the appliance is in
idle condition, open the front
cover.
2. Press and hold the on/
off button until you hear 2
beeps.
3. Close the front cover.
Press the lower bottom part
of the symbol of the touch
button from the front of the
appliance.
35 / EN