Blomberg BLPE 1 User Manual page 27

5 Operation
The pre-brewing function moistens the coffee inside the brewing
unit with a small amount of water before full extraction. This
expands the coffee grounds to build up greater pressure in the
brewer, which helps extract all the oils and bring out the full flavour
of the beans.
1. When the machine is on idle, press and hold the
1. The will then flash and the following buttons will will light up to
indicate different settings:
In ECO Mode
In Speed Mode
In Default Settings
2. Press the "Powder Coffee Button" for ECO mode, the "Standart Bean
Coffee Button" for Speed Mode and the "Intense Bean Coffee Button" for
Default settings. You'll hear two beeps when the mode has been selected.
3. If you would like the setting to remain unchanged, press
for 5 seconds for the machine to return to idle mode.
Pressing the on/off button 2 times will force-shut down the
device.
Fully Automatic Coffee Machine / User Manual
5.11 Cancelling
On-off button should be pressed once to cancel any
running process. Additionally, pressing over a selected
beverage once again after preparation started will also
cancel the operation.
for 5 seconds.
again or wait
27 / EN