Table of Contents
Advertisement
Available languages
Available languages
6
Cleaning
When the appliance is reused again for the first time after empty
system function is used; press the hot water button until water
comes out of the spout.
6.4 Manual Cleaning / Rinsing Function
You can manually clean / rinse the coffee nozzle before or after use. When
in idle, press
• After cleaning / rinsing, the appliance will return to idle.
• The water that comes out of the coffee nozzle is hot and
is collected in the drip tray underneath. Avoid contact as it
splashes around.
If the appliance has not been used for a long period of time,
•
this function is suggested to be used.
Using this function before coffee preparation will also ensure
hotter coffee.
Deactivating the auto-clean mode
Your appliance cleans itself automatically before and after each brewing
operation. You may follow the steps below to deactivate the auto-clean
mode.
• Turn on the appliance by pressing the power on/off button and wait until
it goes into idle mode.
• Open the front cover.
• Press the power on/off button for 5 seconds and a beep will sound.
• Close the front cover.
• The auto-clean operation has been cancelled.
32 / EN
once.
Fully Automatic Coffee Machine / User Manual
Advertisement
Table of Contents
