Switching The Plate; Switching The Plate Off.22 - Blomberg BERU 24200 SS User Manual

The glass ceramic burner/plate is
equipped with an operating lamp and a
residual heat indicator.
The residual heat indicator indicates
the position of the switched on plate
and remains illuminated after switching
off. (When the temperature of the plate
falls below touchable temperature the
indicator light will go off). Weak flicker
illumination is not a problem at residual
heat indicator light.
E NOTICE
Quick heating glass-ceramic plates emit
a bright light when they are switched on.
Do not stare to bright light.
Switching the plate on
The burner/plate control knobs are used
for operating the plates. To obtain the
desired cooking power, turn the burner/
plate control knobs to the corresponding
level.
Cooking
level
1 2 3
warming stewing,
simmering
cooking,
roasting
Switching the plate off
Turn plate control knob to off position
(top).
How to operate on the multiple
region hotplates (model dependant)
Plates with multiple region are used for
different diameter of pans.
By changing the knob position in
clockwise direction or counter clockwise
direction, the diameter of active zone can
be adjusted.
1. .4 Single circuit zone knobs
5 Hotplate warning lamp
Switch off multiple zone hotplates
1. In order to turn off the plates, set the
knob to "OFF" position by turning it.
1 Stage 1
2 Stage 2
3 Stage 3
□ NOTICE
The 2nd or 3rd zones of multiple region
plates will not operate by theirselves.