Recommended Replacement Parts; End-User Periodic Maintenance - Canon imageFORMULA ScanFront 400 Service Manual

E. Recommended Replacement Parts
It is recommended that a dealer keep the following parts in stock for
replacement purposes in case of a hardware failure.
Table 6 – Recommended Replacement Parts List
ScanFront 400 Motherboard
Control PCB
Reading unit (Upper)
Reading unit (Lower)
Sub PCB
Ultrasonic drive PCB
Registration roller
Eject roller
Follower roller
Feed motor
Main motor
LCD unit
Panel relay board
Power supply adapter
2 Part numbers are subject to change without notice.
F. End-User Periodic Maintenance
The parts in the table below must be cleaned or replaced periodically to
ensure a specific level of machine performance. Clean or replace the parts at
the interval specified below.
Item
Main Body
Touch Panel
Scanning Glass
Retard Roller
Feed Roller
Other Rollers
Feed Path
imageFORMULA ScanFront 400 Service Guide
imageFORMULA ScanFront 400 Service Guide
Part Name
Maintenance Interval (Sheets)
200,000
–
–
Replace
–
–
Part Number
MG1-5140-000
MG1-5072-000
MG1-8331-000
MG1-8330-000
MG1-5070-000
MG1-4599-000
MA3-0670-000
MA3-0671-000
MA2-9469-000
MH7-1174-000
MH7-1199-000
MF1-4901-000
MG1-5075-000
MG1-5039-020
As Needed
Clean with a slightly
dampened cloth to remove
any dirt, and then wipe dry
with a clean, dry cloth.
Clean with a dry, lint-free
cloth.
Clean with a slightly
Clean
dampened cloth to remove
any dirt, and then wipe dry
with a clean, dry cloth.
Clean with a commercially
available air blower to
remove any dust and paper
particles that may have
accumulated in the feed
path.
Remarks
November 2016
Page 8