Huawei FusionDC1000A Product Description page 76

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
Item
Fault isolation
Wireless
communicatio
n
4G
WLAN port
Issue 04 (2023-11-10)
Specifications
There are three groups of 12 V ports. Each group has a
maximum current of 660 mA, each route has a maximum
current of 800 mA, and the maximum total current is 2 A.
Group 1: AIDI_1 and DO/12V ports
Group 2: AIDI_2, COM1/AIDI_4, and COM3/12V ports
Group 3: AIDI_3 and COM2/AIDI_5 ports
Supports wireless communication that complies with IEEE
802.15.4.
Supports the 4G module, SMS, and 3G communication, and
provides a standard SIM card slot.
● China: 2G and 4G networks support China Unicom or China
Mobile SIM cards, and 3G networks support only China
Unicom SIM cards.
● Outside China: Select SIM cards according to the following
wireless modes and frequency bands:
– 4G: LTE-FDD, covering frequency bands B1, B3, B5, B7,
B8, and B20; LTE-TDD, covering frequency bands B38,
B40, and B41
– 3G: WCDMA, covering frequency bands B1, B5, and B8
– 2G: GSM, covering frequency bands 900 MHz/1800 MHz
NOTE
● The SIM card provided with the ECC800-Pro supports only the data
function and 4G Internet access, but does not support SMS
messages. To use the SMS function, you need to replace the SIM
card with one that supports both the data and SMS functions.
● Ensure that the site has signal coverage before using the SIM card.
● Due to the performance limitation of the wireless module, China
Telecom SIM cards are not supported.
● The WLAN port on the main control module (02312QAA or
02312QAA-001) is reserved and is temporarily unavailable.
● The WLAN port on the main control module
(02312QAA-004) can be connected to a WLAN antenna for
WLAN communication.
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Management System
69