Ecc800-Pro; Product Configuration - Huawei FusionDC1000A Product Description

FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario)
●
●
Figure 6-2 Layout of management system components
(1) Camera (monitors the long
aisle)
(4) FusionModule Actuator
(7) Water sensor

6.2 ECC800-Pro

6.2.1 Product Configuration

The ECC800-Pro data center controller is mainly used to monitor the devices and
environment in a data center. It consists of the power supply units (PSUs) and
main control module, which are pluggable.
You can configure the ECC800-Pro collector in the following two manners:
Configuration 1 (typical configuration): one PSU and one main control module
Configuration 2: two PSUs and one main control module.
Issue 04 (2023-11-10)
You can learn the peak power consumption of the data center, which provides
data support for improving the lease rate and usage of electricity.
You can collect statistics on cabinet usage, providing support for improving
the lease rate and usage of cabinets.
NO TE
The management system of the FusionDC1000 is configured by using the iManager NetEco
configurator.
NO TE
The ECC800-Pro is deployed in the Rack-A1 cabinet.
Copyright © Huawei Digital Power Technologies Co., Ltd.
(2) Rack-A1 cabinet
(5) Camera (monitors the
entrance room and main
entrance)
6 Management System
(3) Smart ETH gateway
(6) PAD
66