Before Operation - Kenwood TS-140S Instruction Manual

Hf transceiver, multi bander
Hide thumbs Also See for TS-140S:
Table of Contents

Advertisement

1. BEFORE OPERATION
Safety precautions
Never remove the case unless instructed to do so in
this Manual.
If the internal
parts are touched
ac-
cidentally, a serious electric shock might occur.
Never touch internal parts.
If a metal object, such as a hair pin or a needle,
comes
into contact
with the power
socket on the
rear panel, a dangerous
electric shock may
result.
For families with children, never permit children to
put anything, especially metal, inside this unit.
——
Touching the power plug when your hands are wet
may result in a serious electric shock.
=
Never touch with wet hands.
Os
Never
pull, bend
or extend
the power
cord.
This
could damage the power cord, resulting in a broken
cord or short-circuit.
Always grasp the plug.
In case of abnormal odor
If an abnormal odor or smoke is detected, immediate-
ly turn the power OFF and pull out the power cord.
Contact your dealer or nearest Service Station.
Notes on installation
Do not place the unit in a place which is exposed to
direct sunlight, near a heating appliance, etc.
good ventilation.
Choose a location that is relatively free from vibra-
tion.
Cleaning
Silicone cloth
Thinner
Benzine

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ts-680s

Table of Contents