Receiver Operation - Kenwood TS-140S Instruction Manual

4-2. RECEIVER OPERATION
4-2-1. Beep Tones
Audible confirmation of microprosessor functions is
provided in the form of a series of audio beeps.
4-2-2. Audible Mode Announcement
When a Mode key is pressed, the first character of the
mode is sounded in Morse code thru the speaker.
The output level of the ''Beeper'' is adjustable with a
variable resistor located inside the set. (Please refer Made Morse.Code
to Section 6-6-4) USB oe
LSB 'ee
Beep Tone Indication CW (Wide) —-—-
1 short beep | When the following keys are CWN (Narrow) _—-
pressed:
AM
ee
A/B, SPLIT, F.LOCK, A=B,
MeV, SCAN, CLEAR, M.IN FM eae
(When the Memory Scroll mode
is selected.), VFO/M, BAND Noiz:
P, t , RIT, LSB, = 5
Nee ARAN: ! 1 short beep can be selected by pressing the CW/N
s z key and the power switch ON. (Please refer to Sec-
1 long beep When the M.IN key is pressed tion 4-2-8)
again to enter the data.
3 short beeps | A.When the SCAN key is pressed
and the receiver is unable to
memory scan. *2
. When all memory channels are
empty and attempt to select
memory channel with 1 MHz
switch ON. *2
C.When all memory channels are
full and attempt to find out an
empty channel with 1 MHz
switch ON. *2
ive}
Notes:
*1 : 1 short beep can be selected by pressing the
CW/N key and the power switch ON.
(Please refer to Section 4-2-8)
*2 : 3 short beeps can be selected by pressing the
F.LOCK key and the power switch ON. (Please
refer to Section 4-2-8)