Before Operation - Kenwood TS-680S Instruction Manual

1. BEFORE OPERATION
Safety precautions
Never remove the case unless instructed to da so in
this Manual. If the internal parts are touched ac-
cidentally, a serious electric shock might occur.
Never touch internal parts.
If a metal object, such as a hair pin or a needle,
comes into contact with the power socket on the
tear panel, a dangerous electric shock may result.
For families with children, never permit children to
put anything, especially metal, inside this unit.
-~
os
3 A
Touching the power plug when your hands are wet
may result in a serious electric shock.
—
ne
Never touch with wet hands.
JowSx
Never pull, bend or extend the power cord. This
could damage the power cord, resuiting in a broken
cord or short-circuit.
~ Atways grasp the plug.
em
In case of abnormal odor
If an abnormal odor or smoke is detected, immediate-
ly turn the power OFF and pull out the power cord,
Contact your dealer or nearest Service Station.
v
#
es
Notes on installation
Do not place the unit in a place which is exposed to
direct sunlight, near a heating appliance, etc.
O —
lis
Do not store or use the unit in a dusty location or in a
moist atmosphere. Select a location where there is
good ventilation.
d
=n
To maintain good ventilation, do not put anything on
top of the unit. Place the unit at least 10 cm away
from the walls.
Choose a location that is relatively free from vibra-
tion.
Cleaning
Do not use volatile solvents such as alcohol, paint
thinner, gasoline, benzine, etc. to clean the cabinet.
Use a silicone cloth or @ clean dry cloth.
Silicone cloth Thinner Benzine