Sony MXP-290 Operation And Maintenance Manual page 54

The MXP-290 can be controlled by the external equipment such as the Sony BVE-900/910
automatic editing control unit.
To control the unit with the BVE-900/910, insert the BKE-908 monitor switcher interface
board and the BKE-916/916A parallel mixer interface board into the BVE-900/910. Then
connect the unit to the BVE-900/910 using the cables supplied with the BKE-908 and
BKE-916/916A. The BVE-900/910 can edit audio signals in synchronization with the video
signals.
MXP-290
12 OO
Using the external equipment such as the BVE-900/910, the following functions are
available. Controllable functions depend on the connected equipment. For details, refer
to the manuals supplied with the equipment to be connected.
Fade-in and fade-out of each channel :
When the LOCAL switch is not depressed, the signal level is adjusted by VCA before the
channel fader. Set the channel fader to "7" on the level indication, and adjust the level
using the BVE-900/910.
Sending the external signal to the monitor section
When the EXT MONITOR button is not depressed, the signals connected to the MONI IN
1 and 2 connectors can be sent to the left and right monitor lines independently.
Muting of monitoring signal
The output to the MONI OUT connectors can be muied.
Sending any input and output signal to the monitor section
Any input (channels 1 through 8) or output (either line 1 or 2) signal can be sent to the
monitor section. ;
1-13(E)
1 OPFR THITNI