Residual Risks Of Power Drive Systems - Siemens SIMOTION Operating Instructions Manual

Standards, Certificates and Approvals
A.2 Residual risks of power drive systems
RCM (C-Tick)
AUSTRALIA
A.2

Residual risks of power drive systems

Residual risks of power drive systems
The control and drive components of a drive system are approved for industrial and commercial
use in industrial line supplies. Their use in public grids requires a different configuration and/
or additional measures.
These components may only be operated in closed housings or in higher-level control cabinets
with protective covers that are closed, and when all of the protective devices are used.
These components may only be handled by qualified and trained technical personnel who are
knowledgeable and observe all of the safety instructions on the components and in the
associated technical user documentation.
When assessing the machine's risk in accordance with the respective local regulations (e.g.
EC Machinery Directive), the machine manufacturer must take into account the following
residual risks emanating from the controller and drive components of a drive system:
176
This product meets the requirements of the AS/NZS CISPR 22.
Operating Instructions, 11/2016, A5E33441428B
SIMOTION C