Table of Contents
Advertisement
INSTALLATION
- Lift the seperator 90 degrees as shown
below
- Fix the two screw again to the bottom of
cooktop as shown below.
5.
If the cooktop installed above a oven;
there is no need to be installed the
separator. Install according to the
dimensions shown in Figure 5
6. Insert the cooktop centered into the
cutout opening. Make sure the front
edge of the counter top is parallel
to cooktop. Make final check that all
required clearances are met.
14
When installing the hob onto a cabinet,
i
a shelf must be installed in order to
separate the cabinet from the hob as
illustrated in the above figure. This is
not required when installing onto a
built-under oven.
7. LOCATE RETAINER BRACKETS
Remove the retainer brackets from the
literature package.
8. INSTALL THE RETAINER BRACKETS
Install the retainer brackets to the
bottom of the hob. Then snug the bolts
against the bottom of the countertop as
shown.
Advertisement
Table of Contents
