Operation - Blomberg CTI24310 Manual

OPERATION

SENSITIVE TOUCH
Your ceramic hob is equipped with
electronic con-trols with sensitive touch
keys. When your finger presses the key,
the corresponding command is activated.
This activation is validated by a control
light, a letter or a number in the display
and/or a "beep" sound.
In the case of a general use press only one
key at the same time.
Power selection zone "SLIDER" and timer
setting zone
To select the power with the slider, slide
your fin-ger on the "SLIDER" zone. You can
already have a direct access if you put
your finger directly on the chosen level.
Power selection zone "SLIDER" and timer
setting zone
SLIDER
STARTING-UP
Start up / switch off the hob:
Action
To start
To stop
14
DIRECT
ACCESS
Control Display
panel
press [ ON ]
[ main On/
Off ] key
press nothing or
[ main On/ [ H ]
Off ] key
Start up / switch off a heating zone:
Action Control
panel
Switch on Press
cooking cooking
zone zone "On/
Off" key
To set slide on the
(adjust the "SLIDER" to
power) the right or
to the left
To stop slide to [ 0 ]
on "SLIDER"
If no action is made within 20 second the
electronics returns in waiting position.
RESIDUAL HEAT INDICATION
After the switch off of a heating zone or
the complete stop of the hob, the heating
zones are still hot and indicates [ H ] on
the display.
The symbol [ H ] disappears when the
heating zones may be touched without
danger.
As far as the residual heat indicators are
on light, don't touch the heating zones
and don't put any heat sensitive object on
them. There are risks of burn and fire.
Display
[ ON ]
[ 1 ] to [ P ]
[ 0 ] or [ H ]