Care And Maintenance - Blomberg CTI24310 Manual

CARE AND MAINTENANCE

GENERAL CLEANING
INFORMATION
General warnings
!
• Wait for the product to cool before
cleaning the product. Hot surfaces may
cause burns!
• Do not apply the detergents directly
on the hot surfaces. This may cause a
permanent stains.
• The appliance shall be thoroughly
cleaned and dried after each operation.
Thus, food residues shall be easily
cleaned and these residues shall be
prevented from burning when the
appliance is used again later. Thus, the
service life of the appliance extends
and frequently faced problems are
decreased.
• Do not use steam cleaning products for
cleaning.
• Some detergents or cleaning agents may
damage the surface. Do not use abrasive
detergents, cleaning powders, cleaning
creams, descalers or sharp objects
during cleaning.
• There is no need for a special cleaning
agent for cleaning after each use. Clean
the appliance using dish soap, warm
water and a soft cloth or sponge and dry
with a dry microfiber cloth.
• Be sure to completely wipe off any
remaining liquid after cleaning and
immediately clean any food splashing
around during cooking.
• Do not wash any component of your
appliance in a dishwasher.
For the hob:
• Acidic dirt such as milk, tomato paste
and oil may cause permanent stains
on the hobs and components of the
burners/hotplates, clean any overflown
fluids immediately after
Inox and stainless surfaces
• Do not use acid or chlorine-containing
cleaning agents to clean stainless or inox
surfaces and handles.
• Stainless or inox surface may change
colour in time. This is normal. After each
operation, clean with a detergent suitable
for the stainless or inox surface.
• Clean with a soft soapy cloth and liquid
(non-scratching) detergent suitable for
inox surfaces, taking care to wipe in one
direction.
• Remove lime, oil, starch, milk and protein
stains on the inox-stainless and glass
surfaces immediately without waiting.
Stains may rust under long periods of
time.
Glass surfaces
• When cleaning glass surfaces, do not
use hard metal scrapers and abrasive
cleaning materials. They can damage the
glass surface.
• Clean the appliance using dishwashing
detergent, warm water and a microfiber
cloth specific for glass surfaces and dry
it with a dry microfiber cloth.
• If there is residual detergent after
cleaning, wipe it with cold water and dry
with a clean and dry microfiber cloth.
Residual detergent residue may damage
the glass surface next time.
• Under no circumstances should the
dried-up residue on the glass surface
be cleaned off with serrated knives, wire
wool or similar scratching tools.
• You can remove the calcium stains
(yellow stains) on the glass surface with
the commercially available descaling
agent, with a descaling agent such as
vinegar or lemon juice.
• If the surface is heavily soiled, apply
the cleaning agent on the stain with a
sponge and wait a long time for it to
work properly. Then clean the glass
surface with a wet cloth.
21