Lubrication; Greasing The Sprayer - Toro Multi-Pro 1250 Operator's Manual

Figure 35
1. Rear jacking points

Lubrication

Greasing the Sprayer

Service Interval: Every 50 hours—Lubricate the pump.
Every 100 hours/Yearly (whichever
comes first)—Lubricate all grease
fittings.
Grease Type: No. 2 General Purpose Lithium Base
Grease
1. Wipe the grease fitting clean so that foreign matter
cannot be forced into the bearing or bushing.
2. Pump grease into the bearing or bushing.
3. Wipe off excess grease.
The grease fittings positions are illustrated by the
following: Figure 37 through Figure 42.
39