Installing the Counterweight on a Machine with Tracks
Install the counterweight on a machine with tracks per the figure below.
Note: Use the bolt (1 x 8-1/2 inches) previously removed; refer to
Removing the Plow and Counterweight (page
2).
2x
4x
2x
(1 x 4 inches)
(1 inch)
Installing the Mount on a Machine with Tracks
Install the mount using 3 bolts (1 x 9 inches) from the plow assembly. Secure the bolts using 6 washers and 3 nuts that are
included in this kit.
6x
3x
(1 inch)
3