Place the control and electrical box back in the original position and reinstall the 3 screws.
Check the maximum reach of the cable and
install the bracket on the wall with screws.
<
>
so, always place the room wireless remote controllers in locations where the com-
munication test determines that the wireless remote controllers are fully capable of
communication with the wireless receiver.
The internal parts may be damaged, which could result in breakdown of the indoor unit.
shock, fire, or its breakdown.
Place the wireless receiver on the fixed bracket.
Hook the holes on the back of the wireless re-
ceiver onto the projections on the bracket, and
fix the wireless receiver in place.
<
>
Fix the front panel with screws.
EN
6