Advertisement
When
button is touched in the middle of setting, the screen returns to the previous
indication.
When
Touch
or
"
" (no setting) is displayed initially. Choose a number from 1 to 8.
After touching
less receiver.
When the pairing process has been suc-
cessfully performed, "
remote controller and green
EN
steadily lights on the wireless receiver.
When "
" appears on the remote controller
and green
LED on the wireless receiver
blinks , correctly repeat the same process
from step 5.
Even if the pairing process failed, the wire-
less receiver stays in the pairing mode for 5
minutes unless cancelled.
button for 3 seconds or more until orange
controller. Use the wireless receiver to reset pairing information. (Refer to "(3) Resetting
pairing information" in "7.3. Wireless Receiver Functions".)
9
button to select a pairing address, and touch
button, the wireless remote controller starts communication with the wire-
" is shown on the
LED
button to set the address.
.
<Pairing is successful>
Blinking (orange)
<Pairing is unsuccessful>
Blinking (orange)
LED blinks.
Lighting (green)
Blinking (green)
Advertisement
