GE Amersham Imager 680 Operating Instructions Manual page 93

Step
2
3
4
Amersham Imager 680 Operating Instructions 29271308 AB
Action
Check the Static IP radio button in the Network window.
Select the:
1 IP address field and use the keypad to enter the IP address.
2 Subnet mask field and use the keypad to enter the subnet mask.
If desired, select the :
Gateway field and use the keypad to enter the router.
•
Workgroup field and use the keypad to enter the workgroup.
•
Select OK to save the changes.
Result: The connection to the network will be established within a couple of
seconds.
4 Installation
4.4 Network
4.4.1 Network setup
93