GE Amersham Imager 680 Operating Instructions Manual page 108

5 Operation
5.4 Place the tray in the instrument
Step
4
5
6
108
Action
Note:
For Colorimetric Epi-illumination position the gel so that the lanes are par-
allel to the long side of the tray as illustrated below. This is important to avoid
capturing artefacts in the image.
Open the instrument door.
Insert the tray in the correct tray position.
Note:
For Chemiluminescence capturing you may also select the upper tray position
(1 in the illustration below).
1
2
Close the door.
Amersham Imager 680 Operating Instructions 29271308 AB