When...
The intensity of the
image is inadequate af-
ter automatic exposure
or a known exposure
time is required:
A sequence of images is
required:
Full control of exposure
parameters is required
for special applications:
Binning needs to be
changed:
Note:
Amersham Imager 680 Operating Instructions 29271308 AB
Then...
Select Manual exposure and set the exposure time man-
ually.
Select Incremental exposure and set the number of repe-
titions and interval time of the exposures to capture se-
quential images.
Select Advanced exposure
Select Change and choose desired binning option
Do not open the door during exposure as this will stop the exposure and the
data will not be saved.
5 Operation
5.5 Capture an image
5.5.2 Chemiluminescence capture
113