Figure 93 Connection Example Without A Dedicated Remote Support Port; Figure 94 Connection Example When The Ip Address Of The Slave Cm Is Set (And A Dedicated Remote Support Port Is Not Used) - Fujitsu ETERNUS DX100 S4 Design Manual

4. Connection Configuration
LAN Connection
■
Connection Configurations
MNT ports are used for connecting a LAN for operation management.

Figure 93 Connection Example without a Dedicated Remote Support Port

Administration
terminal
LAN switch
IP address A
The following figure provides connection examples for when setting the IP address of the Slave
CM.
Figure 94 Connection Example When the IP Address of the Slave CM Is Set (and a Dedicated Remote
Support Port Is Not Used)
Administration
terminal
LAN switch
IP address A
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic)
SNMP
E-mail server
manager
Syslog server
CM#0 CM#1
Controller enclosure
ETERNUS DX
SNMP
E-mail server NTP server
manager
Syslog server
LAN for operation management
IP address B
CM#0 CM#1
Controller enclosure
ETERNUS DX
157
Copyright 2023 Fujitsu Limited
NTP server
Authentication
server
LAN for operation management
RMT ports are not used.
Authentication
server
Remote support
center
RMT ports are not used.
The IP addresses of the
Master CM and the Slave CM
are set.
Remote support
center
P3AM-7642-32ENZ0