Lan For Remote Support (Rmt Port); Figure 95 Overview Of The Ais Connect Function - Fujitsu ETERNUS DX100 S4 Design Manual

Hybrid storage systems
Hide thumbs Also See for ETERNUS DX100 S4:
Table of Contents

Advertisement

4.
Connection Configuration
LAN Connection

LAN for Remote Support (RMT Port)

When the network connection for the remote support needs to be separated from the company
LAN, use the RMT ports to connect to the remote support center via a different network.
Service for AIS Connect was discontinued in December 2022.
AIS Connect Function
Overview of the AIS Connect Function

Figure 95 Overview of the AIS Connect Function

Customer network
ETERNUS DX
The diagram above describes the overview of the AIS Connect function. The left-hand side repre-
sents the customer and the right-hand side represents the service provider. The connection set-up
initiative is always from the customer side based on regular AIS Connect agent contacts (Simple
Object Access Protocol (SOAP) messages) with the AIS Connect server that can be reached via the
Internet.
AIS Connect agent requests to the AIS Connect server can be handled directly and immediately.
AIS Connect server requests to the AIS Connect agent (remote access) cannot be sent until the
next contact has been set up. If remote access of the AIS Connect is enabled by the customer, the
AIS Connect agent then executes the requests from customer operations such as setting up a tun-
nel for "remote access" or initiating a file transfer.
Contact set-up and request processing are performed via an HTTPS tunnel. Under certain circum-
stances, the firewall must be configured on the customer side to enable this type of tunnel to be
set up. Likewise, proxies (plus ID and password) can be specified during Internet access configura-
tion.
AIS Connect agent can perform the following actions:
Notifying events (Information event, Warning event, or Error event) in the ETERNUS DX to the AIS
Connect server
Sending ETERNUS DX logs to the AIS Connect server
Remote access from the AIS Connect server to the ETERNUS DX
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic)
[Encrypted]
Internet
Customer
LAN
Access firewall
HTTPS tunnel
158
Copyright 2023 Fujitsu Limited
Demilitarized zone
Remote support center
(DMZ)
Monitoring
AIS Connect
server
Diagnosis
P3AM-7642-32ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx200 s4Eternus dx100 s3Eternus dx200 s3

Table of Contents