Preparation; Installing The Antenna; Installing/ Removing The Battery Pack - Kenwood ProTalk NX-P1200AV User Manual

INSTALLING THE ANTENNA

Screw the antenna into the connector on the top of the
transceiver by holding the antenna at its base and turning it
clockwise until secure.

INSTALLING/ REMOVING THE BATTERY PACK

The battery pack is not charged at the factory; charge it before use.
CAUTION
◆ Do not short the battery terminals or dispose of the battery by re.
◆ Never attempt to remove the casing from the battery pack.
1
Align the battery pack with the back of the
transceiver, then press the battery pack and
transceiver rmly together until the release latch on
the base of the transceiver locks.
2
To remove the battery pack, lift the safety catch on
the base of the transceiver, then press the release
latch underneath the safety catch.
3 While pressing the release latch, pull the battery
pack away from the transceiver.

PREPARATION

5
Antenna