Product Introduction; Led Pattern - Mitsubishi Electric MAC-558IF-E Manual

Product Introduction

No Item
1 WPS switch
2 RESET switch Resets the system and ALL settings
3 LED1 (Green)
4 LED2 (Orange) Shows the MAC-558IF-E state
5 LED3 (Green)
Parts
Adaptor unit
[with connecting
cable (5-core)]

LED pattern

:ON :OFF
Description
Power is ON or software downloaded
ALL settings reset
WPS activated (PBC)
WPS activated (PIN)
WPS enabled
WPS failed
Server and access point communication connected, and
heat pump communication failed
Server and access point communication connected, and
heat pump communication connected
Server and access point communication connected, and
heat pump communication starting up
Server communication failed, and heat pump
communication connected
Server communication or access point communication
failed, and heat pump communication starting up
Server communication or access point communication
failed, and heat pump communication failed
Access point communication failed, and
heat pump communication connected
Access point communication failed, and
heat pump communication starting up
10
Description
Activates WPS
Shows the wireless communication state
Shows the local communication state
Optional screw
for mounting
3.5×16
:Flashing
Optional screw
for mounting mounting cord
4×16
LED1
(0.5-sec interval)
(0.5-sec interval)
(0.2-sec interval)
(5-sec)
(once every 5 sec)
(once every 5 sec)
(once every 5 sec)
1
2
Optional Fastener (for
bundling the
clamp
LED2
(0.5-sec interval) (0.5-sec interval)
(5 sec)
(0.5-sec interval)
(once every 5 sec)
(0.5-sec interval) (once every 5 sec)
(0.5-sec interval)
(0.5-sec interval)
(once every 5 sec)
3
4
5
wires)
LED3