NEC Express5800/R120g-1E Maintenance Manual page 31

Chapter 1 Maintenance
[?] When Windows Server 2008 R2 is installed while several disks are connected, the system partition and
the boot partition (100 MB) are created in another disk
→ For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/2530901/ja
[?] When Starter Pack is installed on Windows Server 2008 R2, the following message appears for a moment
upon shutdown
1 program still needs to close:
(Waiting for) Task Host Window
→ No problems for system operation.
For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/975777/en-us
[?] Windows has been installed as "Workgroup" although the installation option was "Join the domain"
 Is the LAN cable properly connected?
→ If the LAN cable is not connected, Windows is installed in workgroup setting, not in domain setting. After
the OS is started, join the domain by using Control Panel.
[?] The following features are installed when installing IIS in Windows Server 2008 R2 using
EXPRESSBUILDER
 Windows Process Activation Service
− Process Model
− Configuration APIs
 Remote Server Administration Tool
− Role Administration Tools
− Web Server (IIS) Tools
→ The features listed above are activated because they are required for the installation of IIS basic
features.
[?] The Telnet Service is not installed
→
Adjust the computer name to 14 characters or less (*), and then install the Telnet Service according to
the following procedure:
(1) Click Run on Start menu.
(2) Enter tlntsvr/service in Open, and then click OK.
(3) Click Start menu, point to Control Panel, click Administrative Tools, and then click Services to
confirm whether the Telnet Service is registered.
* You can specify the computer name at 15 characters or more after installing the telnet service.
(Japanese only)
Express5800/R120g-1E Maintenance Guide
5. Troubleshooting
31