NEC Express5800/R120g-1E Maintenance Manual page 103

Chapter 2 Useful Features
5. If a Remote Management Extended License (*1) is registered, the remote media is added to bootable
devices. The remote media is assigned as follows:
•
The highest priority within "CD/DVD Priorities" is assigned to AMI Remote CD/DVD device.
• When executing Load Setup Defaults in Save & Exit menu, the highest priority within "CD/DVD
ROM Priorities" is assigned to AMI Remote CD/DVD device.
(*1) Refer to EXPRESSSCOPE Engine 3 User's Guide for details of Remote Management Extended
License.
• If Boot Mode is set to "UEFI", HDD Priorities shows the name registered in the
Tips
installed OS. The hard disk model No. may be given for the HDD Priorities. The
partition information in which the EFI boot image is stored may be given for
Removable Priorities.
• The BIOS registers the device information again, which is displayed in HDD
Priorities when the BIOS setting (NVRAM) is cleared if the boot mode is UEFI.
Therefore, the device information may differ from the device information that is
registered by the installation OS. However, the system can be started up without
any problem.
• If Boot Mode is set to "Legacy", HDD Priorities shows the model number of the
hard disk drive.
• Change the bootable device from the SETUP command instead of the Windows
bcdedit.
Express5800/R120g-1E Maintenance Guide
1. System BIOS
103