DIGITNOW M126 - Film Scanner Manual
Precautions and Maintenance
- Do not attempt to disassemble or modify any part of the machine.
- If the product has been dropped or damaged, please do not touch the inside of the scanner to avoid injury.
- If the product emits smoke, odor or there is any other abnormality during use, please stop using it immediately.
- Do not use organic solvents such as alcohol, benzine, or thinner to clean the equipment.
- Do not use it in humid and dusty areas.
- Do not insert too many computer peripheral products powered by USB port, so as to avoid overloading, otherwise the product will not run smoothly.
- Please use a film that conforms to the standard size.
- Cleaning: In order to scan the best effect picture, please make sure it's clean before use.
- Non-use period: When the product is not used for a long time, please remove the power supply.
- The machine supports a maximum of 64GB SD card, but it is recommended to use an SD card with a capacity of 16GB or less, because a SD card with too much capacity may extend the boot time, and may cause a card jam as the machine reads the inserted SD card and calculates the maximum number of accessible photos immediately. If a card jam or crash occurs, please remove the SD card, and then unplug the power supply and turn it on again.
※ In order to protect the machine and save energy, if there is no operation over 10 minutes under the power-on state, the product will automatically shut down. Press on the power button again to start working.
Packing List
- Scanner
- Negative Adapter
- Slide Adapter
- 110 clip
- Super8 clip
- Video cable
- AC / DC power adapter
- USB cable
- Cleaning brush
- User's Manual
Product Schematic
- To clean the backlight, please insert the cleaning brush from the side of the product.
How to use negative clip
- Hold the negatives against the light, and place the negatives facing you correctly.
- Put the 135 film into the Negative Adapter, close the Negative Adapter.
- Insert the Negative Adapter clip into the scanner for scanning.
How to use the positive clip
- Hold the positive clip to the light, and place the positive clip facing you correctly.
- Remove the positive film holder, with the silk-screened side facing up, Open the positive clip, put it into the installed positive clip, close the film holder, and press the buckle tightly.
- Insert the positive clip into the scanner for scanning.
Operation Guide
Introduction to Main Menu Settings
- Language Mode
- USB Mode
- Photo mode
- Playback mode
- Film mode
- Format
- Resolution
Image Capture
- Before scanning photos, please confirm whether the backlight of the product is clean. When cleaning the backlight, please extend the cleaning brush from the right side of theproduct.
- After confirming that the backlight is clean, press the "OK " key in the main menu scan mode to enter the scan mode. In the scan mode, Short press the "Scan/Menu" button to capture, long press the "Scan/Menu" button for two seconds back to the menu homepage.
If any image requires for Mirror or Flip before capture, press LEFT/RIGHT button for Mirror/Flip function, the live view will be adjusted accordingly(This step is to correct user misplaced the film/photo either upside down or flip). Mirror and Flip function can only be used while in the live view mode.
Negative film mode selection
After entering the film mode, the user can select the corresponding film to scan by entering the film type, select the corresponding film type with the left and right buttons, and then press "OK" to confirm.
- Negatives: Select negatives when the negatives loaded in the film holder.
- Positive: Select the positive when the positive is loaded in the film holder.
- Black and white film: select black and white film when the negative is loaded into the clip
Photo Preview
In the main menu mode, press the ◄ or ► key to select the photo preview mode, press the "OK" key to enter the photo preview mode, the scanned photo will be played automatically, and then press the "OK" key to enter the manual selection of preview photos, press ◄ or ► You can manually select and view photos, then press "OK" to enter, exit, delete, back to the main menu options, press ◄ or ► to select the corresponding option and press "OK" to confirm.
- Press the left and right keys to select this icon and press OK to return to the preview autoplay screen.
- Press the left and right keys to select this icon and press OK to delete the current photo.
- Press the left and right keys to select this icon and press OK to return to the main menu.
Language selection setting
In the main menu mode, press ◄ or ► key to select the language setting mode. Press "OK" to enter the language setting. You can set the product to: English, French, German, Italian, Spanish, Pусский, Simplified Chinese, Japanese.
In the main menu mode, press ◄ or ► key to select to format mode, press "OK" key to format all photos on your machine.
Note: After using this function, all data on the SD card will be erased. Please remember to backup your data!
USB connection to computer
In the main menu mode, press the ◄ or ► key to select the USB mode. Press the "OK" key to view the scanned photos on the computer.
Product Specifications
Features: | Film Scan / Removable Disk |
Interface: | USB 2.0 |
Sensor: | 14 million pixel CMOS sensor |
Monitor: | 2.4 "TFT color screen |
Negative film model: | Negative, black and white, slide |
Negative film type: | 135 negatives (36 * 24mm), 126KPK negatives (27 * 27mm), 110 negatives (17 * 13mm), Super8 negatives (4.01 * 5.79mm), positive, negative, black and white |
Light source: | Backlight board |
File format: | Picture: JPEG |
Built-in memory: | 128M |
External memory card: | Memory card supports up to 64GB |
Power supply: | DC 5V ( USB adapter) |
Language: | English / French / German / Italian / Spanish / Pусский / Simplified Chinese / Japanese |
Support system: | Windows XP/vista/Windows7/Windows10/Mac |
Product dimension: | 87 x 86 x102mm |
Weight: | 228g |
Statement
With the improvement of this product, the information may be changed without notice.
Please Note: We reserve the right to change the appearance, specifications, performance, parameters and design of the product without notice. The pictures in the color box and the instruction manual are for reference only. The actual product and the image may be different. The actual product shall prevail.
At the end of its life, the device has to be separated from the other waste. Consign the device and all its components together to a center of electronical and electrotechnical waste recycling center, designated by your local authorities
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download DIGITNOW M126 - Film Scanner Manual
Need Assistance?
Do you have a question about the M126 that isn't answered in the manual? Leave your question here.