Technical Data - DeWalt DCS438N Manual

EngLIsh
CUT OFF TOOL
DCS438
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No‑load/rated speed
Wheel diameter
Wheel thickness (max)
Spindle diameter
Spindle length
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN60745‑2‑3:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
32
EC‑Declaration of Conformity
o
Machinery Directive
WALT one of the
e
Cut Off Tool
DCS438
DCS438
V 18
DC
D WALT declares that these products described under
e
1
Technical Data are in compliance with:
Li‑Ion
2006/42/EC, EN60745‑1:2009 + A11:2010; EN60745‑2‑22:2011
min 20000
‑1
+ A11:2013.
mm 76
These products also comply with Directive 2014/30/EU and
mm 2.2 2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
mm 10
The undersigned is responsible for compilation of the technical
mm 43
file and makes this declaration on behalf of D
kg 0.94
dB(A) 87
dB(A) 98
Markus Rompel
dB(A) 3
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
m/s 3.3
2
65510, Idstein, Germany
m/s 1.5
2
24.09.2021
WALT at
e
WALT.
e